This 2022 Freightliner M2 106 6×6 equipped with a 65’ Altec DT65H derrick digger is a turnkey, freshly certified unit ready for utility, transmission, and distribution work. Built for demanding environments, this truck combines serious lifting power with off-road capability.This truck is powered by a 8.9L Cummins L9330 diesel engine pushing 330 HP and only 14,023 miles backed by a 5-speed Allison automatic transmission.

The Altec DT65H offers a 65-foot sheave height, over 56 feet of horizontal reach, and up to 30,000 lbs of lifting capacity, making it ideal for pole setting, heavy material handling, and augering operations. The fully hydraulic system with pilot controls delivers smooth, precise operation, while the 2-speed digger provides high torque for efficient drilling.

Mounted on a rugged Freightliner M2 106 6×6 chassis, this truck features a dependable Cummins diesel engine paired with an Allison automatic transmission, delivering reliable power and performance in all terrains. With a GVWR in the 56,000–58,000 lb range and full air brake system, it’s built to handle the toughest job sites.

Key Features:

65’ Altec DT65H derrick digger 30,000 lb lifting capacity 2-speed auger / digger Full hydraulic controls 6×6 all-wheel drive chassis Cummins diesel power Allison automatic transmission Fresh certification – work ready

 Vehicle Specifications

Make:

Freightliner

Model:

M2 106 6X6

Stock Number:

4446

Miles:

14,023

Engine:

Cummins 8.9L L9330 Diesel Engine

Transmission:

Allison 5-Speed Automatic Transmission

Front Axle:

16,000 lb

Rear Axle:

40,000 Tandem

Front Tires:

315-80-22.5

Rear Tires:

11R 22.5

GVWR:

56,000

Wheels:

10 Hole Motor

Brakes:

Air

CA CT:

56,000

Other:

A/C, AM/FM/Bluetooth, 1 Bucket Seat &amp; 1 Bench Seat, 2 Strobe Lights, 1- 50 Gallon Fuel Tank, Pintle Hitch &amp; Trailer Brakes

Horsepower:

330

 Equipment Specifications

Make:

Altec

Model:

DT65H

Serial #:

0122GK0865

Work Height:

65'

Capacity:

18,000

Mount:

Center Over Rear Axle

Hours:

571

Insulated:

Yes

Other:

Palm Grip &amp; Lever Controls, Tool Circuits, 4 Outriggers, Hydraulic Hose Reel

ALTEC DT65 Drills / Drilling Equipment LIFTING

Sunrise Equipment Company

This is a 65′ DT65H digger derrick on a 2008 International Paystar 5600 chassis with only 32,419 miles. This is powered by a 10.8L Cummins ISM425V diesel engine pushing 425 HP backed by an Eaton 8-speed manual transmission. This was owned by one of the largest electric utility companies in the country.

SR# 4446 Vehicle Specifications

Make:

International

Model:

Paystar 5600i 6x6

Stock Number:

4447

Miles:

32,419

Engine:

Cummins 10.8L ISM425V Diesel Engine

Transmission:

Eaton 8-Speed Manual Transmission

Front Axle:

21,000

Rear Axle:

40,000 Tandem

Front Tires:

425-65R 22.5

Rear Tires:

11R 22.5

GVWR:

61,000

Wheels:

10 Hole Motor

Brakes:

Air

CA CT:

186"

Other:

A/C, AM/FM/Weather, 1 Bucket Seat, 1 Strobe Light, 1 Spotlight, 1-85 Gallon Fuel Tank, Pintle Hitch + Oilfield Ring Hitch

Horsepower:

425Equipment Specifications

Make:

Altec

Model:

D4060 TR

Serial #:

1207DF0203

Work Height:

65'

Capacity:

30,000 lbs

Mount:

Center Over Rear Axle

Hours:

TBD

Insulated:

No

Other:

Lever Controls, 4' Jib (8,100 lbs Capacity), Tool Circuits, Hydraulic Hose Reel

2007 ALTEC D4060A Drills / Drilling Equipment LIFTING

This is a 2016 SDP 55MLP, 5,500 lb backyard digger with a 37′ sheave height, 3-section hydraulic boom, 2-speed digger, heel winch, pole grabs, rubber tracks, single-man bucket, mounted on a 2016 SDP EZ hauler backyard digger derrick. This is unit is powered by a Yanmar diesel engine, hydraulic drive. This unit only has 415 hours.

The trailer is sold with the unit. 2014 SDP 16′ galvanized equipment trailer 22’11” OAL 18″ high deck 96″ wide 17,500 lbs GVWR 215-75-17.5″ tires Electric Brakes Pintle Hitch

*FINANCING AVAILABLE*

*SHIPPING OPTIONS AVAILABLE*

Sale Price: $84,500

2016 SDP 55MLP Drills / Drilling Equipment EQUIPMENT

This is a 45′ Altec D845A-TR digger derrick on a Bombardier Go-Tract track machine. This machine is powered by a 5.9L Cummins diesel engine and a 4-speed hydrostatic automatic transmission. This machine is equipped with upper controls for the capability of a pin-on bucket.

ALTEC D845A-TR Drills / Drilling Equipment LIFTING

This is a 42′ Simon Telect 92-42 digger derrick on a 1993 Rolligon track machine. This has a 17,250 lbs digger derrick capacity with a 42′ sheave height, and 4 hydraulic outriggers mounted on a 1993 Rolligon RA15 Roughneck crawler powered by a John Deere diesel engine.SR 4196

TELELECT 92-42 Drills / Drilling Equipment LIFTING

1999 Vermeer, D100X120, Directional Drills (HDD), 1999 DIRECTIONAL DRILL VERMEER NAVIGATOR APLEX, D100x120, TRIPLEX PLUNGER DRL11, APLEX MODEL SC-170, TWO RACKS OF PIPES, JUST UNDER 2000 HRS, NO ISSUES READY TO WORK

1999 Vermeer D100X120 Drills / Drilling Equipment EARTHMOVING

Construction Station

2017 Ditch Witch, JT20, Directional Drills (HDD), 

2017  Ditch Witch JT20 with about 5,000 hours.  Comes with DigiTrak Falcon F1 System Receiver and FCD Remove, Falcon F1 15" Transmitter, Transmitter housing Site Load 3' 7-Bolt VR. 2 3/8 FS1 Box It has  been recently serviced and ready to go.  (2 reel trailers optional)

2017 Ditch Witch JT20 Drills / Drilling Equipment EARTHMOVING

2011 BJ, ARTIC CEMENTER Production Equipment, Used 2011 BJ Services Arctic Cementer Pump Trailer, VIN: 2T9SASVC4CDO16935Cummins QSM11-400 BHP @ 2100 RPM (Low hour)Allison 4700-OFS 7-speed TransmissionBJ Pacemaker 4-1/2 Triplex Pump, 10,000 PSIBJ Cement Head/Tub Mixing SystemHigh Pressure Discharge Hyd. hose reelEnclosed Acid/Water storage tanksEnclosed control cabin current frac inventorySerial Number: 2T9SASVC4CDO16935

2011 BJ ARTIC CEMENTER Drills / Drilling Equipment EARTHMOVING

Industrial Diesel

2003 Apache, HA110-VH, Directional Drills (HDD), 2003 APACHE DRILL RIG HA110-VH, 1500 HRS, SELF CONTAINED, 4 WHEEL DRIVE, MANUFACTURED BY NOVMAC, CUMMINS MOTOR, HAS A OIL LEAK, RUNS GOOD

2003 Apache HA110-VH Drills / Drilling Equipment EARTHMOVING

2012 Vermeer, Unknown, Directional Drills (HDD), 2012 VERMEER SC-65L, Well maintained, No issues, 4680 Hours, Runs and operates great, Work ready

2012 Vermeer Unknown Drills / Drilling Equipment EARTHMOVING

DETROIT DIESEL, 12V71 Production Equipment, 425 hours, skid mounted with breaker, no radiatorSerial Number: 12VA087649

DETROIT DIESEL 12V71 Drills / Drilling Equipment EARTHMOVING

CATERPILLAR, C13 Support Equipment, 4355 hours serial number: KWJ01002 , Serial Number: KWJ01002

CATERPILLAR C13 Drills / Drilling Equipment EARTHMOVING

CATERPILLAR, C13 Support Equipment, 13097 hours tier 4 final serial number: KWJ00340 , Serial Number: KWJ00340

2024 MAGNUM, 2500Q Production Equipment, 2500Q Frac Pump Trailer (2025 REFURB)Trailer: 2006 -43 , Tri-axle oilfield trailerRadiator: 2022 GHT Jumbo Cube w/ hydraulic fan driveEngine: Caterpillar 3512C, 2500 BHP @ 1900 RPMCaterpillar TH55E70, 7-speed powershiftDriveline: GWB 390.60 series w/ 130 mm DIN companion flange mountingWell Service pump: SPM QWS2500EXL-4.0 quintuplex pump w/ stainless steel fluid end Controls: IDMS/Concept Controls Group model Tricon 4000 digital control w/ GPS monitoringSerial Number: UNKNOWN

2024 MAGNUM 2500Q Drills / Drilling Equipment EARTHMOVING

2012 VERTEX, NOT SPECIFIED Tubular Goods / Drill String / Rods, Caissons &amp; Drill Core Barrels &amp; Miscellaneous Teeth Rings sold separately CALL FOR PRICE ON TEETH RINGS, For Caissons &amp; Drill Core Barrels ENTIRE BULK PRICE IS $1.10 a pound (Entire Bulk is 68,000 gross pounds) = $74,800 FOR EVERYTHING or EACH Caisson or Drill Core individually at $1.30 a pound with a minimum of $5,000 purchase. Call Christopher Lillo 310~977~7903#1 45" od, 44" Id, 1/2" wall 1 at 12ft long (2851.2 lbs) 1 at 17ft long (4039.2 lbs)#2 24" od, 23" Id, 1/2" wall 3 at 31ft long (3974.2 lbs each) #3 24" od, 23" Id, 5/8" wall 6 at 31ft long (4969.3 lbs each)#4 33" od, 32" Id, 5/8" wall 1 at 12ft long (2546 lbs) 1 at 13ft long (2866.5 lbs) 1 at 16ft long (3528 lbs) 1 at 18ft long (3969 lbs)#5 14" od, 3/8" wall 1 at 22ft long (1236.4 lbs) 2 at 30ft long (1686 lbs each) 1 at 31ft long (1742.2 lbs)Miscellaneous Teeth Rings2 at 48" 1 at 45" 2 at 36" 3 at 24" 3 at 18"Serial Number:

2012 VERTEX NOT SPECIFIED Drills / Drilling Equipment EARTHMOVING

Lillo Machinery

2011 MUD TECH INTL, MCS500 Drills - Directional, lift pump only, electric, Make OfferSerial Number:

2011 MUD TECH INTL MCS500 Drills / Drilling Equipment EARTHMOVING

Western Trencher & Equipment

1995 BARBCO, BD15 Drills - Directional, BARBCO INCLOSED MIX TANK , ALL HYD , SQUARE METAL TANK WITH BAFFELS, HOPPER ,APPROX 1000 GALLONSerial Number:

1995 BARBCO BD15 Drills / Drilling Equipment EARTHMOVING

WEIR, TWS2250 Drilling Equipment, TWS 2250/is 8 inch serial number BP 2250 gear ratio 36.353 Model TWS 2250 8 inch date 03 2015 PHP 2250 MFG date, August 2014 gear ratio 6.353:1 serial number G0814 10399 , Serial Number: G081410399

WEIR TWS2250 Drills / Drilling Equipment EARTHMOVING

WEIR TWS2250, Drilling Equipment, TWS 2250/is 8 inch serial number BP 2250 gear ratio 36.353 Model TWS 2250 8 inch date 03 2015 PHP 2250 MFG date, August 2014 gear ratio 6.353:1 serial number G0814 10399 Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

WEIR TWS2250 Drills / Drilling Equipment EQUIPMENT

2000 DITCH WITCH, MM5 Drills - Directional, Ditch Witch MM5 300 gallon Mud Mixers, 2 available, Honda 5.5 gas engines, $3,000 eachSerial Number:

New & Used Drills / Drilling Equipment For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

ALTEC DT65

2007 ALTEC D4060A

2016 SDP 55MLP

ALTEC D845A-TR

TELELECT 92-42

1999 Vermeer D100X120

2017 Ditch Witch JT20

2011 BJ ARTIC CEMENTER

2003 Apache HA110-VH

2012 Vermeer Unknown

DETROIT DIESEL 12V71

CATERPILLAR C13

CATERPILLAR C13

2024 MAGNUM 2500Q

2012 VERTEX NOT SPECIFIED

2011 MUD TECH INTL MCS500

1995 BARBCO BD15

WEIR TWS2250

WEIR TWS2250

2000 DITCH WITCH MM5