2012 Caterpillar, Model Dozers, -Cab with heat and ice cold air -All cab glass intact -No leaks -No smoke or blow-by -150 inch straight blade with tilt -Rear auxiliary hydraulics -Limb risers -Rear and side screens -SALT undercarriage at 70% -Very nice, work ready machine

Zadoon LLC

2015 Caterpillar, Model Dozers, -36 Yard Wood -Chip Blade -U/C very good! -A/C (Working) -Erops -APEX Fire Suppression System -82 in gauge / 22 in shoe width -44 per side / 8 track rollers per side -Hydraulic Tank 20 gal/ Oil 10 gal /Coolant 20.3 gal -Steering 5700 psi / Dozer 3500 psi -Type CWTS-A/AP /wt 7712 lbs

2015 Komatsu, Model Dozers, -Cab -Heat -Cold AC Radio -Komatsu Intelligent grade control system -Undercarriage 75% -6 way 11 blade -GPS controller in Cab -Runs &amp; operates excellent.

1999 Caterpillar, Model Dozers, -600 hrs left on Engine Warranty (3000 hrs on engine) -2500 hrs on U/C (installed 2018, 85% remaining) -6000 hours on Transmission (done 2/2013) -SU blade -Complete rebuild of lower blade section -Blade cylinders rebuilt -EROPS -26" track pads -Ripper Valve -Well maintained machine -CAT Facts available -Videos available on request

2014 Caterpillar, Model Dozers, -Semi U blade -Differential Steering -Drawbar -New alternator and joystick -TA1 inspection and CatFacts available -80%+ UC -Will need DPF filter purged -Strong runner

1997 Caterpillar, Model Dozers, -EROPS with Heat &amp; Air Conditioner -U Blade -4 Barrell Single Shank Ripper (No Shank) -Engine: 3,106 hours since rebuild -Torque Conv.: 1,450 hours since rebuild -Transmission: 760 hours since rebuild -Left Track Links: Poor -Right Track Links: Poor -Left Track Pads: 32 x Poor -Right Track Pads: 32 x Poor

ECM IDLE HOURS: 2,176, WARRANTY INCLUDED, CAT C15 ACERT Engine, Engine Block Heater, Power-shift Transmission, Cab (ROPS) with A/C, Differential Steer, Fuel Tank Guards, Auto Reverse Cooling Fan, 26" Extreme Service Track Shoes, Heavy Duty Brakes, Drawbar Counterweight, CAT Angle Blade with Twin Tilt, CAT SU Blade is Available, Allied W12E Winch With Screen, CAT SS or MS Ripper is Available, High Speed Oil Change, Top Carrier Rollers, Flood Light Arrangement, Rated at 364 HP, Weight 82,000 LBS. &nbsp;Repair / Condition Report: The following are repairs completed by CAT dealer prior to Marcel Equipment owing the machine: At 3,070 hours, CAT installed NEW implement pump. At 3,256 hours, CAT installed NEW ARD head &amp; flame sensor. At 4,798 hours, CAT installed NEW main power relay. Upon arrival, all covers &amp; guards were removed, machine was properly power washed. Complete visual &amp; operational inspections were completed. Both blade lift cylinder rods were rechromed. Resealed both blade lift cylinders. Due to oil pan leaking, we took this opportunity to install NEW bottom end bearings. Inspected engine oil pump - good. Installed NEW front crankshaft seal. Resealed engine oil pan. Installed NEW track frame cannon seals on both sides. Installed NEW water pump. Installed NEW thermostats &amp; resealed housings. Inspected all hoses, replaced as required. Installed NEW transmission pump driveshaft couplings &amp; bearing. Resealed torque output yoke. Resealed starter motor. Checked heater, A/C - all good. Checked all controls, switches, gauges - all good. Verified the following pressures were within OEM specs: Engine oil, Fuel, Boost, Transmission pump, Transmission lube, Torque in/out, Flywheel oil, Brake, Pilot, Implement pump standby, Implement pump high pressure cut off, Steering charge, Steering pump loop. This is a very clean, well maintained unit that is ready to work.&nbsp;

Marcel Equipment Ltd

CAT 3306T Engine, Engine Block Heater, Power-shift Transmission, Cab (ROPS) with A/C, Enclosed Disc Brakes, 26.5 x 25 Tires, CAT U Blade with Twin Tilt, No Spin Front &amp; Rear Differential, Counterweight, Drawbar, Air Suspension Seat, Mirrors, Lights, Wipers, Heater, Inside Mirrors, AM/FM Radio, Rated at 254 HP, Weight 48,000 LBS. Repair and Condition Report: Engine was previously REBUILT by the CAT dealer - Dean Machinery. Transmission was also previously REBUILT by the CAT dealer - Dean Machinery. Upon arrival to our yard, the following repairs were completed by Marcel Equipment Limited at 16,193 hours: All covers and guards were removed and unit was power washed. Engine oil and filter were changed, filter was cut open and checked - clean. Transmission filter and oil were changed, filter was checked - clean. Changed the hydraulic oil, filter was cut open and checked - clean. Front &amp; rear differential oil levels good and oils clean. Fuel filter was changed. Inner &amp; outer air filters were checked and clean. Checked the parking brake. Replaced the A/C belt. Replaced the serpentine belt. Replaced the left work light. Replaced the right tail light. Checked the fan hub. Installed a NEW pin and bearing on the rod end of the left steering cylinder. Installed a NEW pin and bearing on the right steering cylinder. Resealed the right steering cylinder. Installed NEW hydraulic cooler tubes. Resealed both pilot valves. Installed 2 NEW batteries. REBUILT the left cylinder yoke using NEW bearings. REBUILT the turbo charger. Installed a NEW back up alarm. Checked all grease points and greased unit. Checked the articulation. Checked the rear axle oscillation. REBUILT the seat using NEW bearings, sliders, cushion and arm rest. Checked all hoses. Installed NEW heater hoses. Checked the engine block heater. All pressures were taken and are within CAT specifications. This unit is in good condition and is ready to work.

John Deere 400G bull dozer 6-way blade Undercarriage is in great shape T handle control for blade 4 speed transmission Everything works as it should Stored inside Has been an excellent MACHINE…

Construction Station

2000 DEERE, 550H LGP Dozers - Crawler, 2000 john deere 550h lgp. Believed to have around 5500 hours(hour meter not working) Undercarriage is in excellent shape. Only thing it needs is a few lights. Have a few extra parts/ filters for service to go with it. No smoke , runds and operates great!!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

1988 DRESSER, TD15E Dozers - Crawler, APROX YEAR 1988 DRESSER TD15E, INTERNATIONAL MOTOR, NEW STEERING CLUCHES, NO LEAKS, TURNS GOOD, RUNS OUT GOOD, RUNS AND OPERATES GREAT, READY TO WORK !!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

1995 CATERPILLAR, D3C XL III Dozers - Crawler, 1995 DOZER D3C III, HOUR METER READS 78 SINCE REBUILD, 80% U/C, SIX WAY BLADE, NEW STARTER, REAR RIPPERS, STRONG RUNNING MACHINE, READY TO WORK.Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

2002 CATERPILLAR, D5G LGP Dozers - Crawler, 02 CATERPILLAR D5G LGP, HOUR METER READS 1997 HOURS, 50%-60% U/C, FORESTRY CAGE, BLADE HAS SOME PLAY, MINOR HYDRAULIC CYLINDER SEAP, RUNS AND OPERATES GREAT, READY TO WORK!!!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

2006 CATERPILLAR, D5N Dozers - Crawler, 2006 CATERPILLAR D5N, 5,300 HRS, 95% U/C, MINOR BLADE CYLINDER LEAK, ROOT RAKE AVAILABLE FOR EXTRA COST, MACHINE RUNS AND OPERATES GREAT, READY TO WORK!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

1990 CATERPILLAR, D5H Dozers - Crawler, 1990 CATERPILLAR D5H, 13300 HOURS, 6 WAY BLADE, 80% U/C, COMES WITH LAZER GRADE CONTROL, NO LEAKS, DOES NOT USE OIL, 70-80 % BLADE PINS, NEWER TRANS FROM CAT DEALER, VERY WELL MAINTAINED , RUNS AND OPERATES GREAT, READY TO WORK !!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

1998 CATERPILLAR, D5C LGP HST III Dozers - Crawler, 1998 CATERPILLAR D5C LGP III HYSTAT, GOOD U/C, TIGHT, NO LEAKS, RUNS AND OPERATES GREAT, READY TO WORK !!!Serial Number: 6CS00405,For More Information Call: Moby Bilbeisi +17349059000

1997 CATERPILLAR, D5M Dozers - Crawler, 1997 CATERPILLAR D5M, APROX 12K HOURS , GOOD U/C, GOOD CONDIOTION, RUNS AND OPERATES GREAT, READY TO WORK !!!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

2002 CATERPILLAR, D4C HST III Dozers - Crawler, 2002 CAT D4C HST, CAB, HEAT, NEWER U/C, 6 WAY BLADE, NEW HYD OIL COOLER AND FLUIDS WITHIN LAST 100 HRS. PILOT CONTROLS, HYDRO STATIC TRANS, 10,500 HOURS, SECOND OWNER MACHINE, RUNS GREATSerial Number: ,For More Information Call: Ismael Bilbeisi +17343838000

1998 CATERPILLAR, D6M Dozers - Crawler, 1998 CAT D6M DOZER, 10,900 HOURS, GOOD U/C, ONE OF THE IDLERS COULD BE REPLACED, COMES WITH ROOT RAKE, STRONG RUNNING MACHINE, READY TO WORKSerial Number: ,For More Information Call: Moby Bilbeisi +17349059000

2000 CATERPILLAR, D5C HST III Dozers - Crawler, 2000 CAT D5CIII HYSTAT, 5236 HOURS, GOOD U/C, 6 WAY BLADE, RUNS AND OPERATES GREAT, READY TO WORK !!!Serial Number: ,For More Information Call: Moby Bilbeisi +17349059000

New & Used Dozers For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

2012 Caterpillar D6T XL

2015 Caterpillar D8T

2015 Komatsu D51PXI-22

1999 Caterpillar D8R

2014 CATERPILLAR D8T

1997 Caterpillar D11N

2012 CATERPILLAR D8T

1999 CATERPILLAR 814F

1994 DEERE 400G

2000 DEERE 550H LGP

1988 DRESSER TD15E

1995 CATERPILLAR D3C XL III

2002 CATERPILLAR D5G LGP

2006 CATERPILLAR D5N

1990 CATERPILLAR D5H

1998 CATERPILLAR D5C LGP HST III

1997 CATERPILLAR D5M

2002 CATERPILLAR D4C HST III

1998 CATERPILLAR D6M

2000 CATERPILLAR D5C HST III