700,000mbtu Heatec HeaterInventory #: HT2731Burner:

Make: Power Flame Model: C2-GO-15 S/N #: 119887245 Output:700,000 MBTU (Approximate) Fuel Type: Combo Fuel (Oil &amp; Gas)Honeywell Fluid Actuator:

Type: V4055D 1019 Volts: 110/120V Gas Type: G-LP

Includes:

<ul><li>Gas Train</li><li>Diesel Fuel Kit</li><li>Expansion Tank</li><li>Circulating Pump</li><li>Reclaimed Heat Scavenging System</li></ul>

Note:

<ul><li>Control Panel: Not Included  </li></ul>

1.2 MBTU Heatec C2-GO-15 Asphalt Plant Components EQUIPMENT

Aggregate Systems Inc

Portable 25,000 Gallon AC Tank Inventory #: ACT2106 25,000 Gallon Split Tank 10/15 Hy-Way SN: 25STT240 Portable Minor Skin Issues 2 Axle Has Lifting Eyes Metering Skid Coiled

 Road-readiness needs to be checked

 Location:MS Condition:USED

HY-WAY 25,000 Asphalt Plant Components EQUIPMENT

REDUCED PRICE - Yard portable Gencor 36'' Slat Conveyor with loadout batcher GENCOR SINGLE PIECE PORTABLE SLAT CONVEYOR WITH BATCHER

 38" wide Gencor single-strand, 4" pitch, X3433 roller chain 9-tooth segmental headshaft sprocket and 9-tooth split tailshaft sprocket 5½" high, 17" wide slats 25 HP, 1800 RPM, TEFC electric motor Hydraulic cylinder to raise and put in position Two 3½" square tube support legs Lightweight and durable ¾" MDO plywood inspection covers held to the top of the conveyor with a series of clamp-down devices Bottom section of the slat is heated to keep the product at a high temperature, keep the slat running smoothly, and ease clean-out procedures Slat conveyor lined with ½" Ni-Hard castings and ½" AR-225 cheek plates 25 HP rotary air compressor with moisture separator, cold-weather package, and air hoses Starting gear mounted in NEMA enclosure

Condition: Only 40,000 tons run through since purchase by current owner. Owner purchased Gencor SES. Some wire and controllers were taken off and used for new SES.

 Location: Ontario Canada

GENECOR Slat conveyor Asphalt Plant Components EQUIPMENT

Astec Baghouse Two-section skidded baghouse Top-removal bags (bags are still installed in the baghouse) Safety handrails Reverse air system with reversing fan Single auger discharge 18 baghouse sections Rated at 52,000 ACFM Opposing fan damper Scott Fan (S/N: S4493) Size 490 backward-incline exhaust fan with 150 HP motor NEMA enclosure with starters and breakers Exhaust stack included

 All specifications, dimensions, and condition descriptions are approximate and are provided to the best of ASI's knowledge. Information subject to change pending inspection.

 Location: CO

ASTEC 52,000 Acfm Baghouse Asphalt Plant Components EQUIPMENT

ADM (Mile Maker A.C. Tank) 30,000-gallon tank Coiled Skid-mounted Very light coking

 The tank is in good shape. It is 12' wide, 49'6" long, and 12'8" tall. There is almost no buildup in the bottom. There are some small tears in the aluminum cover over the insulation. No valves are included; this is a bare tank, ready for use.

 Location: CO

ADM 30,000Gl AC Tank Asphalt Plant Components EQUIPMENT

Year: 2016 Manufacturer: Gencor Model: 89" x 36' Parallel Flow Dryer Condition: Excellent

Description: 89" x 36' parallel flow dryer Ultra II 40 MMBTU oil/gas burner Trunnion drive with (4) 15 HP motors 5 HP slinger conveyor 480V / 3 Phase / 60 Hz Skid-mounted Low tonnage through unit (less than 40,000 tons) Ideal for drying aggregates, frac sand, minerals, salt, and similar materials

 

Location:

Saskatchewan Canada

2016 GENECOR 89" x 36' Parallel Flow Dryer Asphalt Plant Components EQUIPMENT

Astec self-erect silo system

This portable astec self-erect silo system is in nice condition.

<ul><li>two bin storage both bins are on independent weigh scales</li><li>main bin 65 ton</li><li>secondary bin 30 ton</li><li>the drag slat conveyor is 300+ tph.</li><li>this unit will need new chain and the sprockets moved</li><li>"the chain "single 4” pitch roller chain uses 21” x 6” x ¾” slats" was shortened and sprockets moved to accommodate a jumper slat "</li><li>the unit has a ni-hard floor with side wear protection.</li><li>sliding bearings on the side walls help insure long chain life.</li><li>a 50 hp motor provides the power (not on unit)</li><li>the batcher is mounted on the end of the drag conveyor.</li><li>second hopper is fed through the reject chute</li><li>heavy abrasion resistant steel liners are in the cone area.</li><li>an air compressor is mounted tank is mounted on the side</li><li>electrical is mounted in a side nema cabinet.</li><li>the suspension is quad axle</li><li>the system is cable erected</li></ul>

ASTEC 65 ton SEB Asphalt Plant Components EQUIPMENT

12 Yard Dry Batch Model: SERIES II Serial Number: 78PZ1101 Still Erected Condition: Used Stock Number: A2253 3 Silos (2 On Main Plant, Single Portable Horizontal Silo) 10,000 portable Gallon Water Tank Single Feed 8x20 conex box , heat/air, quick disconects. Control House with ACT Batching controls model trailblazer486, sn-1172 (Div. of Stevens concrete) Currently Set Up For Operation (Ready To Work) Plant has all new wire and motors along with VFDS in 2024.

 The Port-A-Pour Series II is a highly efficient, mobile concrete batch plant mounted on a single trailer. It is designed to produce high-specification concrete on-site at a maximum rate of 70 to 80 cubic yards per hour

 Port-A-Pour Series II

 Main Plant Maximum production rate of 70 to 80 cubic yards per hour Physical dimensions 74 feet in overall length, width 12’-3”, height 14’-6”, 60,000 pound empty weight. Total approximate ready mix production since purchase is 15,000 yards 15 cubic yard sand and rock bins with feeder belts to the blender box driven with variable speed drives for proportional delivery Twin shaft blender for combining cement with aggregates prior to the addition of water. Blending reduces potential cement clumping and sand balling problems yielding consistent concrete. Wear shoes on the blender blades are new. 55,000 pound capacity on board silo with air slide In frame auger for delivery to the blending box with 10 h.p. drive equipped with variable speed control Primary power requirements, 480 volt 3 phase. 125 KW minimum service using generated or public power.  All motor starters, variable frequency drives, and electronic controllers are protected with NEMA enclosures 230 gallon per minute water pump Auxiliary water pump for filling saddle tanks Adjustable height main delivery conveyor, 24” wide belt x 40 feet long. Equipped with a soft motor starter. Auxiliary Silo

 112,000 pound capacity with air slide Auger delivery to the blending box on the main plant with variable speed drive

 Loads: Main Plant Portable (Tandem Axle) Auxiliary Silo (Tandem Axle) Water Tank (Tandem Axle) Feed Bin and Conveyor (Skidded) Control Room (Skidded)

Port-A-Pour II 12 yard Asphalt Plant Components EQUIPMENT

2015 ADM 200tph drumInventory #: DM2969

Make: ADM Year: 2015 Capacity: 200tph 15 hp drives Dodge TXT gear boxes 3/8” Shell Good Flights 6” x 13.5” Trunnions Trunnion drive Feed and Outlet Breaching Loaded on Trucks Low Tonnage Through Drum

Location: NY

Condition: USED

2015 ADM 200Tph Asphalt Plant Components EQUIPMENT

Manufacturer: PORT-A-POUR 12 Yard Dry Batch Model: SERIES II Serial Number: 78PZ1101 Still Erected Condition: Used Stock Number: A2253 3 Silos (2 On Main Plant, Single Portable Horizontal Silo) 10,000 Gallon Water Tank Single Feed Re-Relocatable Control House Currently Set Up For Operation (Ready To Work) Plant has all new wire and motors along with VFDS in 2024.

The Port-A-Pour Series II is a highly efficient, mobile concrete batch plant mounted on a single trailer. It is designed to produce high-specification concrete on-site at a maximum rate of 70 to 80 cubic yards per hour

Port-A-Pour Series II

Main Plant Maximum production rate of 70 to 80 cubic yards per hour Physical dimensions 74 feet in overall length, width 12’-3”, height 14’-6”, 60,000 pound empty weight. Total approximate ready mix production since purchase is 15,000 yards 15 cubic yard sand and rock bins with feeder belts to the blender box driven with variable speed drives for proportional delivery Twin shaft blender for combining cement with aggregates prior to the addition of water. Blending reduces potential cement clumping and sand balling problems yielding consistent concrete. Wear shoes on the blender blades are new. 55,000 pound capacity on board silo with air slide In frame auger for delivery to the blending box with 10 h.p. drive equipped with variable speed control Primary power requirements, 480 volt 3 phase. 125 KW minimum service using generated or public power. All motor starters, variable frequency drives, and electronic controllers are protected with NEMA enclosures 230 gallon per minute water pump Auxiliary water pump for filling saddle tanks Adjustable height main delivery conveyor, 24” wide belt x 40 feet long. Equipped with a soft motor starter. Auxilary Silo

112,000 pound capacity with air slide Auger delivery to the blending box on the main plant with variable speed drive

Loads: Main Plant Portable (Tandem Axle) Auxiliary Silo (Tandem Axle) Water Tank (Tandem Axle) Feed Bin and Conveyor (Skidded) Control Room (Skidded)

Port-A-Poer 2 Series 2 Asphalt Plant Components EQUIPMENT

Make: Gencor Year::2007 Model: 300 Ultra Drum Size: 8'7'' x 44' 4-30hp motors Counterflow Drum Insulated Shell Flights, Tires, Trunnions, Breaching, Rap Collar, Frame, And Burner All Good Rap Collar Skidded 100mmbtu Genco Ultra II Burner Combo, Oil/Gas Currently Running on Gas

This drum was replaced with a larger unit, ran last season 2025

 

Located In - North Canada

2007 GENECOR 300 Ultra Drum Asphalt Plant Components EQUIPMENT

STANDARD HAVENS BAGHOUSE Era: 1990’s Model: Magnum size 28 Bags: 448 total Bag dimensions: 6” x 16’ long Filtration: Nominal cloth area: 12,096 sq. ft. Capacity: 66,000 CFM @ 5.5 CFM/sq. ft. Construction:3/16” bent plate including tube sheet (rigid, long-lasting) All bags accessible from top of unit Large volume design for dust drop-out before filtration Access &amp; Components:Side walkway for accessing double-diaphragm Goyen valves Outlet duct with Astec fan, 200 HP premium efficiency motor, damper, and stack Large air holding tank piped to unit (no compressor) Hopper section is skid mounted for ease of moving and reassembly 12” diameter screw in bottom of hopper, driven by 5 HP motor Heavy-duty mesh screen over auger Large hopper access door Condition:Above average condition Sandblasted and painted before plant shut down Needs fresh coat of paint Unit down on ground, ready for shipment Owner will load onto buyer’s trucks

Standard Havens Baghouse Asphalt Plant Components EQUIPMENT

Portable 30,000 Gallon AC Tank

Heatec Portable 30,000 Gallon Direct-Fired Tank (Diesel Fuel) Burner Controls in NEMA Cabinet Power Flame Burner Scavenger Coils Unloading Pump Hot Oil Circulating Pump with Expansion Tank Tandem Axle

Heatec Portable 30,000 Gallon AC Tank Asphalt Plant Components EQUIPMENT

Relocatable Pitless Scales Make: Load Master Scale Model: FT2 Size: 10' x 70' Incline Loading and Exit Ramps Included

Low Profile Pitless Motor Truck Scale 125 Ton Gross Capacity 50 Ton CLC (Concentrated Load Capacity) NTEP Approved CoC 89-077A3 (PDF) Qty. Six (6) 100,000 lb Double-Ended Shear Beam Load Cells Free-Floating Deck with Double Link Suspension Bumper Checking System Fiberglass NEMA 4X Junction Box with Surge Protection Located in the Scale 1/2″ Diamond Deck Plate Primed with Rust-Inhibitive Zinc Chromate Primer and Finish-Coated with Durable Enamel

Load Master Scales FT2 Asphalt Plant Components EQUIPMENT

Caterpillar 1000 kW Generator (Self-Contained Portable Unit) Year: 2015 Model: APS1000A Engine: C32 ATAAC Hours: 2,982 (Very Low Hours) Generator: CAT SR4B Power: 60 Hz, 480 Volts Standby: 1000 kW (1250 kVA) Prime: 910 kW (1137 kVA) Portability: Custom Factory-Built 30' High Cube Container with Sound Attenuation (78 dB(A)), Tandem Axle

Unit Features: Cat Digital Voltage Regulator Cat EMP 4.4 Control Panel Portable Containerized Module 1,250-Gallon Onboard Double-Walled Fuel Tank Fuel Transfer System Transfer Switch Battery Charger

CATERPILLAR APS1000A Asphalt Plant Components EQUIPMENT

Dragon 500 BBL Frac Tank Trailer Axle: Single Axle Tires: 11R 22.5 Serial #: 30515

Tank Construction &amp; Features: 1/4″ Steel Plate Tank Construction Smooth Interior Walls for Easier Cleaning V-Bottom Floor for Better Drainage 3″ Fill Line Manways Conveniently Located on Front, Side, and Top 4″ Drains and Front Inlet/Outlet Heavy-Duty Nosebar Assembly

Fittings &amp; Components: Flange-Mount Blaylock LL 10 P/V Vent, 16 oz Pressure, 0.4 oz Vacuum Settings 2″ Coupling with Plug 4″ Flange with Blind Cover 21″ Manway Domed Lid and Bars 3″ Elbow Fill Line with Cap Safety Walkway (36″ Grating) Access Stairs Level Gauge with 8″ Stainless Steel Ball “Y” Support (Holds Ball 1″ Minimum Off Floor) Front Drain with Valve, Threaded Flange, Plug, and Chain (2) 21″ Manways with Domed Lids 11.00 x 22.5 Tubeless Tires on 10-Hole Steel Wheels Folding Handrails 4″ Flange Valve with Threaded Flange, Plug, Chain, and Remote Operation Handle

Running Gear &amp; Suspension: 25K Axle with Automatic Slack Adjusters Top-Mounted 30 Service Chambers Outboard Drums Hutch 9700 Suspension with 3-Leaf High-Arch Springs

Lighting: DOT Tail Lights and Lower Marker Lights (No Top Lights) 4″ Coupling with Plug

500 BBL Frac Tank Asphalt Plant Components EQUIPMENT

AsphaltFusion CLEAN Inventory #: FC22852 How AsphaltFusion CLEAN (100% X23) Works

 Mode of action (X23): Cationic fatty amines bind to oxidized binder sites, peptize asphaltene clusters, and drop interfacial yield stress so residue releases. Surface conditioning: Adsorbs to metal oxides and leaves a thin, hydrophobic boundary film. Fresh mix has less to grab → lasting release. Citrus (d‑limonene) cleaners: Great solvent swelling/softening, but no persistent boundary layer— effects fade after solvent flash‑off.

Key Advantages vs. Citrus Solvents

 Removes heat‑aged, highly oxidized buildup faster—layers sheet off after short dwell. Doubles as a true release agent—monolayer film cuts re‑adhesion during reloads. Fewer reapplications and less mechanical scraping → safer, faster cleanouts. Packaging: 55‑gal drums, 250‑gal totes.

Pre‑Treatment (Release) — Fast SOP

 1) Remove loose debris; surfaces should be dry.  2) Mist or wipe a very thin, continuous film of AF CLEAN onto contact areas.  3) Allow 5–15 min to adsorb; wipe off visible excess (aim for a monolayer).  4) Re‑treat after wash‑downs, long idle periods, or heavy abrasive service.

 Cleanup — Fast SOP for Stuck Buildup

 1) Knock down crust; wet residue edges with AF CLEAN.  2) 5–15 min dwell; re‑wet as layers lift.  3) Mechanical assist (plastic/wood scrapers) as needed.  4) Final wipe; optional quick re‑treat for next load (release).  Safety &amp; Handling (Summary)

 Use gloves/eye protection; ventilate—avoid misting in confined spaces.

Location:USA Condition:USED

2025 Asphaltfushion Clean Cleaner Asphalt Plant Components EQUIPMENT

Stationary 2015 200tph ADM Drum Inventory #: DM2826 15 HP drives Dodge TXT gearboxes 3/8” shell Good flights 6” x 13.5” trunnions Trunnion drive Feed and outlet breaching Loaded on trucks Low tonnage through drum No burner included

Dryer: Make: Astec Portability: Portable, Triple Axle Size: 7’ x 42’ Model: PDM742F Burner Make: Hauck Burner Model: SJO-4360A-111-06-03-02 Burner Serial Number: 85-117-3 Fuel Source: Natural Gas Year: 8-85 Motors: (4) 25hp Motors PRN: 24925 Fan: 75hp Thickness: Average of .300 Hydraulic Legs with Kit Elongated Knockout Box on Drum

 Baghouse: Make: Astec Model: RBH67DB SN: 99064-3001 Portability: Stationary, Skidded Motors: (2) 125hp Motors Pulse Jet Most Doors Replaced with Stainless Steel Compressor: 20hp Rotary Compressor Extra Air Storage Single Auger Discharge, Precleaned with Discharge Conveyor

 Sand Elevator: Bucket Size: 40’T Belt Size: 18’’ x 10’ Rubber Belt Feeds 3 Screens Screen Make: Midwestern Year: 2023 Screen Size: 5’ x 10’ Screen Decks: 2 SN: 0123-5106 Model: MEV510-2

 Astec Bucket Elevator Make: Astec 80’ Long 12'' x 7’ Buckets with Rubber Belts

 Sand Silos: Quantity: 6 Silos Type: Sand Silos Capacity: (5) 125 Ton and (1) 100 Ton Gravity Fed Pneumatic Ram Discharge 12’ x 13’ Base 30’’ x 45’ Reject Conveyor 36’’ x 70’ Stacker Conveyor 24’’ x 45’ Feed Conveyor from Screen to Bucket Elevator

 Feed System Make: Astec Size: 8’ x 16’ Number of Bins: Single Feed Conveyor: 36’’ x 20’ Incline Weigh Bridge: Portable, 30’’ x 50’ Reject Conveyor: 30’’ x 40’

 Control House: Size: 8’ x 20’ Type: Van Box Manual Start/Stop – Burner/Baghouse Bucketed Starters, New Relay Cabinet

 Connext Box: Located Under the Control House, Used for Quality Control Gibson Screen and Misc Other Items

 Parts Box: Miscellaneous Parts Bags, Motors, Rollers and Cans, etc.

 Other: Above Ground Wire in Cable Trays Newer Electrical Components Plant Seems Empty 2023 Screening System

 CALL FOR PRICING

ASTEC PDM742F Asphalt Plant Components EQUIPMENT

REDUCED PRICE- 2018 Genco Ultra 2, 70mbtu BurnerInventory #: BN2824

Genco Burner Ultra II Low NOX Burner 70 MMBTU Year: 2018

Gencor Gen3D Burner Control System

Burner Features; NFPA compliance fuel trains (oil and LP) • Fuel/air modulating valve • Fuel and air pressure gauges • Fuel oil temperature gauges • Burner junction box wired for tri-fuel arrangement • Ignintion transformer • Pilot burner assembly • Two-stage quarl • Slip seal ring for mating to dryer • Modulating drive motor (actuator) • Flame scanner ( when using GenControls) • Rugged steel construction • Compact, completely packaged • Compressed air atomization for burning all commercially available grade of fuel oil • Low noise to aid in OSHA compliance

Burner is also part of a drum package. Please see inventory number DM2825 for more details.

New & Used Asphalt Plant Components For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

1.2 MBTU Heatec C2-GO-15

HY-WAY 25,000

GENECOR Slat conveyor

ASTEC 52,000 Acfm Baghouse

ADM 30,000Gl AC Tank

2016 GENECOR 89" x 36' Parallel Flow Dryer

ASTEC 65 ton SEB

Port-A-Pour II 12 yard

2015 ADM 200Tph

Port-A-Poer 2 Series 2

2007 GENECOR 300 Ultra Drum

Standard Havens Baghouse

Heatec Portable 30,000 Gallon AC Tank

Load Master Scales FT2

CATERPILLAR APS1000A

500 BBL Frac Tank

2025 Asphaltfushion Clean Cleaner

2015 ADM 200Tph

ASTEC PDM742F

2018 70 MBTU genco ultra 2