2006 ATLAS COPCO, ROC D3 Drills - Vertical, Equipped with COP 1240 Drifter28 hours on machine since upgrades:New track chainsNew Ecm motor controlNew mast rollerNew cableNew nose cone sealsNew accumulator diaphragms2 new control switches at control stationNew stainless steel rail guidesNew hydraulic hosesNew dust collector hoseFull serviceWater tank removed but parts to reinstall are on the shelf.Stock of parts to go with machine:Filters:(2) Compressor air inner/outer (4) fuel secondary(2) compressor oil(10) dust collectorHammer:(6) striking bars(1) Front head rebuild kit includes:-flushing head seals-stop ring-guide bushing-oRingsCompressor:(1) control valve(1) load control solenoid(1) thermostat and gauge(1) air/oil separator filter(14) compressor drive beltsEngine:(1) thermostat(1) throttle control cylinderSerial Number:

2006 ATLAS COPCO ROC D3 Drills / Drilling Equipment EARTHMOVING

Larmee Equipment & Supply

2004 ATLAS COPCO, ECM660 III Drills - Vertical, Montabert HC160 DrifterSet up for T51Cummins Diesel Engine Unit is showing 2642.7 engine hours, We estimate approximately 12,642.7 total frame hours. And 4513 percussion hoursSerial Number:

2004 ATLAS COPCO ECM660 III Drills / Drilling Equipment EARTHMOVING

2011 ATLAS COPCO, FLEXIROC T35-11 Drills - Vertical, COP1840 Drifter*CAT C7.1 TIER 4 Diesel Engine*Currently set up for T51*9620 total Engine Hours &amp; 3755 Percussion HoursHolds up to 14" ft StarterDust Collector &amp; Water InjectionsVery Good to Excellent Condition for Age and HoursSerial Number:

2011 ATLAS COPCO FLEXIROC T35-11 Drills / Drilling Equipment EARTHMOVING

2015 ATLAS COPCO, FLEXIROC D60 Drills - Vertical, DTH Class*Cat C15 Tier 4 Final Diesel Engine *Drill Pipe: 16 ft pipe x 4 x 2-7/8 REG API Thread.Very Good Condition This rig has 9800 engine hours and 6000 impact hours.Serial Number:

2015 ATLAS COPCO FLEXIROC D60 Drills / Drilling Equipment EARTHMOVING

Serial # 4500B1317DR074513 Motor: John Deere 4045HFC92 4.5L 4 cyl diesel elec inj Air to Air: Yes Tires: ST225/70R15 Rims: 6 lug Hour Reading: 1,535 Length: 13' Width: 5'8" Height: 5'7" Weight: 4,340 Added Details: Runs Well, Makes air, 400 CFM at 125 PSI, Two 3/4" air connections, One 1 1/2" air connection

2013 Atlas Copco XAS400JD7 Air Compressors INDUSTRIAL

Arthur Trovei & Sons

ATLAS COPCO HM 1760 Q, Hammer/Breaker - Hydraulic, Atlas Copco Hydraulic Breaker, Pin Diameter -- 80mm, Pin Spacing -- 17.5", Rib Spacing -- 12.125", Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2007 ATLAS COPCO HM 1760 Q Hammers ATTACHMENTS

Nichols Equipment - Des Moines

2013 Atlas Copco XAS1800JD7 Air Compressor, s/n 8972 4225 17

4,170 hours

Tier 4

Dual Air Outlets

Sound Attenuated Enclosure

Digital Display

Tandem Axle w/Adjustable Pintle Hitch, Trailer Brakes

Good Running Condition

Ex rental machine has been very well maintained

Complete service and is ready to work.

New Paint

 

Spec Sheet link: XAS 1800 JD - Atlas Copco USA

 

 

$99,500.USD Hartford, Wisconsin 53027 USA

2013 ATLAS COPCO XAS1800JD7 Air Compressor Air Compressors EQUIPMENT

Strickland Equipment

2006 ATLAS COPCO, CM780D Drills - Vertical, Enclosed Cab, Air Conditioner, Pressurized Cab, Cat C13 6 Cylinder 440 hp Diesel Engine, Atlas Copco 10 ft Boom, 27 ft Mast, Rod Changer, Dust Collector, ( 6 ) 3.5 in Drill Rods, 14 in Triple Grouser Track ShoesSerial Number:

2006 ATLAS COPCO CM780D Drills / Drilling Equipment EARTHMOVING

Prestige Equipment, Inc.

2016 ATLAS COPCO, XAS185KD7PE Air Compressors, 2016 Atlas Copco XAS 185 Air Compressor, Only 1315 hours, Fully Serviced within the last year, NEW fuel pump, NEW oil return line, New 4 pin harness connector, READY TO WORK!, Call Christopher Lillo 310~977~7903Serial Number: HOP053638

2016 ATLAS COPCO XAS185KD7PE Air Compressors INDUSTRIAL

Lillo Machinery

2014 ATLAS COPCO, FLEXIROC T45 Drills - Vertical, 2014 Year - Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air CompressorCOP3060 Drifter13,219 Total Hours4,922 Percussion HoursSet up for T51 (51mm) Drill SteelNo noticeable Blowby or known issues with Engine. Currently installing a new Auto Greaser. $34,500.00 Just Spent on Rebuilding the COP3060 Drifter rebuilt @ 13,214 engine &amp; 4,921 percussion Hours$14,000.00 spent on replacing track frame bushings and some repairs on undercarriage, performed a factory recommended 1,000 hour total service, and fixed a Rod changer Arm Gripper. This was done @ 12,917 HoursSerial Number:

2014 ATLAS COPCO FLEXIROC T45 Drills / Drilling Equipment EARTHMOVING

2009 ATLAS COPCO, ROC D3 RRC Drills - Vertical, - COP 1840HE Drifter- Radio Remote Control- Cummins Tier III EngineSerial Number:

2009 ATLAS COPCO ROC D3 RRC Drills / Drilling Equipment EARTHMOVING

2005 ATLAS COPCO, ROC D7-11 Drills - Vertical, - 12,000 engine hours- 4,167 percussion hours- Setup for T45- COP1840 DrifterSerial Number:

2005 ATLAS COPCO ROC D7-11 Drills / Drilling Equipment EARTHMOVING

2004 ATLAS COPCO, ROC D7-11 Drills - Vertical, - 10,561 engine hours- 3,033 percussion hours- Setup for T45- COP1840 DrifterSerial Number:

2004 ATLAS COPCO ROC D7-11 Drills / Drilling Equipment EARTHMOVING

2015 ATLAS COPCO, SMARTROC T40 Drills - Vertical, - Unit is a 2015 Atlas Copco SMARTROC T40-11- 8,325 engine hours- 2,160 percussion hours- COP2560 plus DrifterSerial Number:

2015 ATLAS COPCO SMARTROC T40 Drills / Drilling Equipment EARTHMOVING

2014 ATLAS COPCO, FLEXIROC T50 Drills - Vertical, - CAT C9 Tier4- 492CFM/152PSI Air- COP 3060ME Drifter- Setup for GT60- 5,245 Engine Hours- Drifter rebuilt at 4,909 hours- New feed motor at 4,100 hours- New feed chain &amp; hose reel sprockets at 4,000 hours- Replaced complete A/C system at 3,962 hours- Replaced engine serpentine belt at 3,962 hoursSerial Number:

2014 ATLAS COPCO FLEXIROC T50 Drills / Drilling Equipment EARTHMOVING

ATLAS COPCO, PB420 Hammer/Breaker - Hydraulic, Atlas Copco PB420, 45-38 mm Pins, 10-5" Stick Width; Has been tested and works well., Attachment, Serial Number:

2007 ATLAS COPCO Attachment Hammers ATTACHMENTS

Weaco Equipment

ATLAS COPCO, HC1055 Compactor, NEW!!!! ATLAS COPCO HC1055 Vibe Plate Attachment, currently fits a 25 ton excavator, Call Christopher Lillo 310-977-7903, Attachment, Serial Number: BGF0017226

2012 ATLAS COPCO Attachment Compaction Attachments ATTACHMENTS

2013 ATLAS COPCO, FLEXIROC T45 Drills - Vertical, 2013 FlexiROC T45-11*Approx. 6500 total hours*COP2560 Drifter (Just rebuilt)*Set up to handle T51One owner unit. Very good to excellent condition.Serial Number:

2013 ATLAS COPCO FLEXIROC T45 Drills / Drilling Equipment EARTHMOVING

2011 ATLAS COPCO, ECM660 IV Drills - Vertical, 3.5 - 4.5 Inch Class*HC158 Drifter*5950 total frame hours*844 percussion hoursOverall unit is in excellent condition. Will be cleaned at time of sale.Serial Number:

2011 ATLAS COPCO ECM660 IV Drills / Drilling Equipment EARTHMOVING

2011 ATLAS COPCO, POWERROC T45 Drills - Vertical, 3.5 - 4.5 Inch Class*HC158 Drifter*5950 total frame hours*844 percussion hoursOverall unit is in excellent condition. Will be cleaned at time of sale.Serial Number:

2011 ATLAS COPCO POWERROC T45 Drills / Drilling Equipment EARTHMOVING

Atlas Copco, Atlas Copco - CAT C32 ENGINE - ALLPARTS INVENTORY, Stock Number: 451-5994

Atlas Copco Atlas Copco - CAT C32 ENGINE - ALLPARTS INVENTORY Parts - Other PARTS

All Parts Inc

Epiroc ST1030 Atlas Copco Bucket Tilt Lever. Rebuilt.

New & Used Heavy Equipment For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

Atlas Copco Atlas Copco - CAT C32 ENGINE - ALLPARTS INVENTORY

2023 ATLAS COPCO ST1030