ECM Idle Hours: 3,876, CAT C18 ACERT Engine, Powershift/Autoshift Transmission, Secondary Steering, Cab (ROPS) with A/C, Hydraulic Disc Brakes, Automatic Retarder Control, 29.5R25 Tires, 45 Ton Capacity / 33 Cubic Yards, Tailgate is Available, Automatic Traction Control, Rear View Camera, Rated at 511 HP, Weight 75,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 3,208 hours, CAT performed an update on the steering lines. At 5,581 hours, CAT performed the transmission replacement under the update. At 6,185 hours, CAT performed the center axle differential update. Upon arrival to our yard, all covers were removed & unit was power washed. Visual & operational inspections were completed. Unit was serviced. Engine oil & filter changed, filter was cut open & checked for contaminates - clean. Transmission oil & filter changed, filter checked - clean. Hydraulic filters changed & checked - clean. Checked oil levels in the final drives - good. Checked oil levels in the differentials - good. Engine, torque, transmission & hydraulic pressures were taken to ensure within OEM specs. The following repairs were completed ensuring a work ready unit: Installed NEW steering pins & bearings on rod end of cylinders. Installed NEW pins & bearings in articulation hitch. Installed NEW box mounting pins & bearings. Installed NEW front A-frame pins & bearings. Installed NEW pins & bushings in tailgate assembly. Installed NEW box lift cylinder pins & bearings in rod ends. Installed NEW front crank seal. Resealed starter. Replaced any required hoses & lines including the ones under cab. Inspected cab & completed all required repairs. Completed required welding repairs to inside of box.
