2008 CATERPILLAR, D10T Dozers - Crawler, The D10T is engineered for tough conditions, and the 650 horsepower C27 engine can deliver the power and superior performance to handle the most demanding jobs. This machine comes equipped with a single shank ripper and a recently reskinned, dual tilt U-blade. The transmission, differential, hydraulic pumps, and track frames have all been inspected and reconditioned as needed. The cab has been fully refurbished, and the air conditioner has been replaced for optimal comfort. This bulldozer is in immaculate condition and ready to work for you!What's greatEngine - Full rebuild, new crank standard bearing sizing + full bench test completed on Finning test bench, all pressures meet Cat specs.Transmission - Full rebuild + full bench test on Finning test bench, all pressures meet Cat specs.Differential - Complete Cat dealer rebuild.Hydraulic pumps Transmission pump full rebuild. Main pump reconditioned. Fan pump and motor fully inspected, within spec.Main Frame stripped to bare frame, checked for cracks, all new pins and bushings.Hardnose Crack checked, all new bushings and pins.Radiator & Aftercoolers Full inspection, pressure tested each mod, new seals, 1 aftercooler replaced new, other inspected and tested.Final Drives, steering and brakes inspected and reconditioned as needed.Track Frames crack checked, replaced major cartridge pins, and inspected minor pins, resealed track adjustment cylinders, new center pins/bushings on equalizer bar, resealed outer pins, new pivot shaft bearings and seals.Undercarriage replaced rear idlers, inspect front idlers within tolerance, new rollers, new rails and shoes, new sprocket segments,Hydraulic cylinders All cylinders on machine resealed and repacked.Hydraulic Hoses inspected and replaced as required.Hydraulic coolers All coolers inspected and flushed; engine oil cooler new.Cab fully refurbished, original gauge cluster, showing original hours, new headliner, new glass, seat in excellent condition.Air Conditioner new compressor and all new lines, evaporator, condenser, and heater core inspected and cleaned.Wiring all wiring harnesses inspected and replaced as needed. Main cab and engine harnesses new.Blade and Ripper replaced bushings, replaced any pins out of tolerance, trunnions in spec, blade face recently reskinned, GET 80% or better.Oils and Filters all oils and filters are new throughout machine.What needs workNot ApplicableAbout this equipmentWith a zero hour, full rebuild from a bare frame completed in 2023, this 2008 Cat D10T dozer is the full package! This is a one owner machine, and all rebuild work was completed by former Cat employed Red Seal mechanics.FeaturesDual Tilt U-BladeSingle Shank RipperFully Refurbished Enclosed CabROPS/FOPSA/C & HeatFull Sandblast & Repaint FinishSpecificationsEngine: CAT C27 - 27L - 650 Hp