2002 PUTZMEISTER TK50, THIS MACHINE WILL BE FULLY REFURBISHED AND READY TO PUMP. WE WILL REPLACED ALL THE WEAR PARTS INCLUDING: NEW CUTTING RING, NEW WEAR PLATE, OUTLET AND INLET BEARINGS ARE NEW, NEW PISTON CUPS, 90% "S" TUBE, NEW HOPPER, NOSE AND BACK BEARING, GOOD DISCHARGE OUTLET, GOOD HOPPER GRATE, NEW AGITATOR ASSEMBLY'S BOOTS, GOOD SHIFT CYLINDER AND SWITCH OVER ARMS, NEW SERIAL NUMBER PLATE, GOOD FRAME, GOOD FENDERS, NEWTONGE FOR TRAILER, AXLE, TIRES, GREASE AXLE, AXLE BEARING, NEW LIGHTS ASSEMBLY AND WIRING, GOOD GAS TANKS, AND WATER BOX DRAIN, NEWACCOMULATOR BOTTLE BLADDER, GOOD DIFFERENTIAL  CYLINDERS NO LEAKS, GOOD OPERATOR CONTROL BOX, ALL E-STOPS WORK, NEW HYDRAULIC SIGHT GLASS, GOOD HYDRAULIC FAN, GOOD ACCOMULATOR CONTROL VALVE, HYDRAULIC OUTRIGGERS AND AGITATOR CONTROL VALVE, GREAT WORKING ENGINE WITH NO LEAKS OR BLOW BY, NEW MOTOR OIL AND FILTERS, NEW HYDRAULIC OIL AND FILTERS WITH GAUGE, NEW PRESSURE GAUGES, NEW BELT, AIR FILTER AND, ALL OTHER SETTINGS ACCORDING TO STANDARDS, GOOD THROTTLE CABLE, READY TO PUMP CONCRETE.

2002 PUTZMEISTER TK50 Concrete Pumps ASPHALT-CONCRETE-COMPACTION

JED Alliance Group, Inc.

2005 PUTZMEISTER TK50, 2005 PUTZMEISTER TK50 Concrete Pump, "S" TUBE AT 85%, NEW CUTTING RING, OUTLET BEARINGS AND SPECTACLE PLATE, 90% MATERIAL CYLINDERS, NEW AGITATOR BLADES, NEW AGITATOR BOOTS AND INSIDE ASSEMBLY, GOOD GREASE LINES AND PUMP, TONGUE FOR TRAILER WITH PISTON BREAK, GOOD TIRES AND FENDERS, GOOD AXLES, LIGHTS AND BEARINGS, NEW GAS CAPS, NEW THROTTLE CABLE, NEW VOLUME CONTROL, GOOD CONTROL BLOCKS, ACCOMULATOR BOX AND WATER BOX DRAIN, WIRELESS REMTRON CONTROL, GOOD E-STOPS, GOOD BATTERY, NEW HYD. SIGHT GAUGE, GOOD FUSES, GOOD AND STRONG ENGINE, NEW OIL AND FILTERS, NEW HOPPER GRATE SWITCH, NEW CONTROL GAUGES, GOOD BELTS, MUFFLER AND AIR INTAKE, MAIN PUMP SETTING AT 280-300 BAR, ACCOM. PUMP 200 BAR, PRECHARGE GAS 100+HYD. FLUID 100 BAR, AGITATOR AND OUTRIGGERS PRESSURE 200 BAR, READY TO PUMP.

2005 PUTZMEISTER TK50 Concrete Pumps ASPHALT-CONCRETE-COMPACTION

2002 PUTZMEISTER TK50, 2,632 hours, 85% ?s? tube, new cutting ring, compression seal, outlet bearing and wear plate, 85% material cylinders. Complete refurbishing done, all new wear parts. Ready to start pumping, contact for more info Concrete Pump / Concrete Pumps

2003 PUTZMEISTER TK50, Fully restored Putzmeister TK50 for sale, all new wear parts, oils, filters and electrical. This unit has been pressure tested and it?s ready to start working right away, will pump 1.5 inch rock. Our units are located in Florida and we have the biggest inventory in restored trailer pumps for sale. Concrete Pump / Concrete Pumps

2003 PUTZMEISTER TK50 Concrete Pumps ASPHALT-CONCRETE-COMPACTION

2002 PUTZMEISTER TK50, This beauty has a new hydraulic pump, new material cylinders, new everything. She has been reconditioned to factory specs and its looking for a new home.

Discover the power and versatility of the Putzmeister TK 50 for your construction projects! Equipped with superior power, it is perfect for shotcrete work and a wide range of concrete placement tasks. The innovative angled hopper makes filling and cleaning easier, saving time and effort on the job site.

With impressive capacity, it can pump a variety of materials at a maximum speed of 54 cubic yards per hour. Additionally, thanks to its robustness, it can handle the toughest mixes seamlessly, ensuring exceptional results in every application.

With a maximum concrete pressure of 1,150 psi and an axle capacity of 7,000 pounds, the TK 50 is designed to tackle challenges with ease and guarantee optimal performance in any work environment. Boost your productivity and work quality with the Putzmeister TK 50 today!

2009 PUTZMEISTER TK50 Concrete Pumps EQUIPMENT

Putzmeister Thom-Katt TK 50 Concrete/Shotcrete Pump This pitbull of a pump can tackle most every job you can think of, we will deliver it 100% operational, inspected under high pressure and fully serviced ready to pump concrete, In JED ALLIANCE our tech staff ensures every assembly works how is suppossed to. The Putzmeister TK 50 has more horsepower for shotcrete work and is ideal for a wide variety of concrete placing jobs and for pumping structural concrete. The TK 50 features an angled hopper that’s easier to fill and clean. It can pump a variety of materials at up to 54 yd³/hr, handle the harshest mixes, and tackle a variety of applications. Specifications Maximum volume output *54 yd³/hr (41m³/hr) Maximum concrete pressure1,150 psi (79 bar) Maximum aggregate size1.50″ (38mm)

2007 PUTZMEISTER TK50 Concrete Pumps EQUIPMENT

Great news for construction professionals! Our Putzmeister TK 50 concrete pump is about to undergo a complete makeover and will be ready to take your work efficiency to the next level. We've paid attention to every detail to ensure that this machine not only meets but exceeds your expectations. Here's a sneak peek at what we've done:

Total Renovation: From a new cutting ring to a brand-new wear plate, we've replaced all wear parts to ensure optimal performance. Not only that, but the bearings, both outlet and inlet, are completely new along with the piston cups and the “S” tube at 90% efficiency.

Significant Improvements: We've added a new hopper, along with upgraded front and rear bearings. The discharge outlet and hopper grate are now more efficient, ensuring a steady and uninterrupted flow of concrete.

Updated Components: With new agitator assembly boots, a renovated shift cylinder, and switch-over arms, this machine is built for durability. Moreover, we've installed a new serial number plate, improved the frame, fenders, and even the trailer hitch.

Safety and Reliability: All emergency stop systems are functional, with a new hydraulic level sight and an effective hydraulic fan. Additionally, the engine is in excellent condition, free from leaks or any issues, ensuring reliable operation.

Comprehensive Maintenance: We've changed the engine oil and its filters, as well as the hydraulic oil and its filters, including new pressure gauges. A new belt, air filter have also been installed, and all other components have been adjusted according to the highest standards.

This Putzmeister TK 50 concrete pump is not just ready for action but promises to bring efficiency and reliability to your construction projects like never before. Ready to take your construction to the next level? Contact us and make this exceptional machine yours!

2006 PUTZMEISTER TK50 Concrete Pumps EQUIPMENT

Putzmeister Thom-Katt TK 50 Concrete/Shotcrete Pump
This pitbull of a pump can tackle most every job you can think of, we will deliver it 100% operational, inspected under high pressure and fully serviced ready to pump concrete, In JED ALLIANCE our tech staff ensures every assembly works how is suppossed to.
The Putzmeister TK 50 has more horsepower for shotcrete work and is ideal for a wide variety of concrete placing jobs and for pumping structural concrete. The TK 50 features an angled hopper that’s easier to fill and clean. It can pump a variety of materials at up to 54 yd³/hr, handle the harshest mixes, and tackle a variety of applications.
Specifications
Maximum volume output
*54 yd³/hr (41m³/hr)
Maximum concrete pressure1,150 psi (79 bar)
Maximum aggregate size1.50″ (38mm)

New & Used PUTZMEISTER TK50 Concrete Pumps For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

2002 PUTZMEISTER TK50

2005 PUTZMEISTER TK50

2002 PUTZMEISTER TK50

2003 PUTZMEISTER TK50

2002 PUTZMEISTER TK50

2009 PUTZMEISTER TK50

2007 PUTZMEISTER TK50

2006 PUTZMEISTER TK50

2007 PUTZMEISTER TK50