location_lockdown

referral_links

gallery_videos

phone_override

Nichols Equipment - Des Moines

2016 DEERE 250D II, Off-Highway Trucks, 2016 Deere 250D Off Road Dump Truck, Dump Body with Tailgate, Dump Body Heater, Cab Heat &amp; A/C, Cloth Heated Air Ride Seat, Electric Mirrors, Radio, Tire Pressure Monitoring System, Either Start Aid, Coolant Heater, Just came back off of a 8 month rental. Went through our shop and came out with a clean bill of health @ 3,875hrs!---Deere Build Sheet, IT4 Engine, 1400CC Battery, JDLINK Ultimate/SIM1 NA 5 Year, Dump Body, Dump Body Heater, Tailgate, DC English Decals, Electric Mirrors, Heated HB OPER/TRNR Seat, Radio, 15 AMP Converter, 23.5R25 XADN MI-3PC RM, Tire Pressure Monitoring System, A/C Charge, Quick Service, EHTER Start Aid, Coolant Heater - 110V, ---Specs, Engine - 6090, Horsepower - 265 hp., Max Torque - 789 lb ft., Transmission - ZF 6HP592C, Forward Gears - 6, Reverse Gears - 1, Max Speed - 31 mph., Length - 31', Width - 9.25', Height - 11.5', Wheelbase - 16.4', Ground Clearance - 1.4', Dump Height - 20', Dump Ground Clearance - 1.9', Dump Angle - 70 Degrees, Lower Time - 6 Sec., Rated Payload - 51,150 lbs., Struck Capacity - 13.7 yd3, Raise Time - 11.9 Sec., Heaped Capacity - 18 yd3, Center Axle Empty - 8,995 lbs., Front Axle Empty - 22,355 lbs., Rear Axle Empty - 8,975 lbs., Front Axle Loaded - 29,013 lbs., Center Axle Loaded - 31,394 lbs., Rear Axle Loaded - 31,085 lbs., Total Empty - 40,345 lbs., Total Loaded - 91,492 lbs., Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2016 DEERE 250D II Off Highway Trucks INDUSTRIAL

2023 KUBOTA SVL97-2, Skid Steers - Track, ***Full Factory Warranty***2023 Kubota SVL97-2 Skid Steer, Backup Camera, Radio, Cab Heat &amp; AC, 2-Speed, Quick Attach, Standard Flow Aux Hydraulics, --- Specs ---Engine - V3800, Emissions Tier - Tier 4 FinalPower - 96.4 hp, Aspiration - Turbocharged, Rated Operating Capacity - 3,200 lbs., Tipping Load - 9,143 lbs., Breakout Force Bucket - 7,961 lbs., Breakout Force Lift Arm - 6,742 lbs., Lift Arm Path - Vertical, Ground Pressure - 4.4 psi., Track Ground Contact Length - 65.6", Travel Speed Low - 5.0 mph., Travel Speed High - 7.3 mph., Traction Force - 12,178 lbs., Min. Ground Clearance - 11.5", Bucket Hinge Pin Height at Max Lift - 128.5", Aux. Hydraulic Flow - 23.1 gpm., Operating Weight - 11,299 lbs., --- Dimensions ---Length - 123.5", Width - 77.2", Height - 83.3", Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 KUBOTA SVL97-2 Skid Steers INDUSTRIAL

VIRNIG BSGV66, Grapple, Bucket, 66" Virnig Skeleton Grapple,Overall Width: 67.5", Overall Height: 26.5", Overall Depth: 36.9", Structural Wear Bars: 8,Space Between Tines: 8.9", Grapple Jaw Opening: 35.2", Approximate Weight: 780bs, Recommended Loader Capacity: Less than 2400lbs, Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

VIRNIG BSGV66 Bucket ATTACHMENTS

VIRNIG ISG78, Grapple, Bucket, 78" Virnig Industrial Scrap Grapple ---Specs---Overall Width: 79.5", Overall Height: 29.0", Overall Depth: 35.5", Structural Wear Bars: 5,Grapple Jaw Opening: 38.8", Approximate Weight: 1130lbs, Recommended Loader Capacity: Greater than 2400lbs, Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

VIRNIG ISG78 Bucket ATTACHMENTS

STANLEY MB05, Hammer/Breaker - Hydraulic, Stanley MB05S02 Hydraulic Breaker setup for a Skidloader,Specs,Impact Energy Class 550ft/lbs, Blows Per Minute 650-1,550, Weight (Tool &amp; Mounting Brkt) 480lbs, Length (Tool &amp; Mounting Brkt) 53", Tool Working Length 15", Tool Diameter 2.7", Hydraulic Pressure 1,500-2,000psi, Flow Range 10-22gpm, System Relief Pressure (Minimum Cracking) 2,600psi, Sound Power Level (LW) 126dBA, Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2020 STANLEY MB05 Hammers ATTACHMENTS

2023 DEERE 325G, Skid Steers - Track, *FULL FACTORY WARRANTY* Backup Camera,Cloth Air Ride Seat w/ Heat!RadioSelf Leveling Bucket, ISO Joystick Controls, 2 Speed, Hydraulic Quick Attach, Cold Start Package, --- Warranty Information ---Basic Warranty 27APR2025 or 2,000 Hours - What Ever Comes First, Factory Undercarriage 26APR2026 or 4,000 Hours - What Ever Comes First, Emissions Warranty 28APR2028 or 3,000 Hours - What Ever Comes First, --- Deere Build Sheet --- 2SP STDFL SLEV CB/AC PQT,ISO SWITCHABLE CTLS &amp; JSPPK,ENGINE TURBO 4TNV98CT,ENGLISH OP MAN &amp; DECALS,JDLINK,NARROW ZIG-ZAG M BAR TRK65",2" SEAT BELTW/SHOULDERSTRAP,AIR RIDE SEAT (CLOTH WHEAT),REAR VIEW CAMERA,COLD START PACKAGE 110V,RADIO AM/FM W/BLUETOOTH,HD REAR GRILLE,FOOTREST WITH FLOORMAT,78" CONSTR BKT W SERRATEDED,--- Specs --- Engine Manufacturer Yanmar, Engine Model 4TNV98CT, Engine Tier 4, Horsepower 70 hp, Fuel Capacity 21 gal., Operating Capacity 2,590 lb., Operating Weight 9,500 lb., Tipping Load 7,400 lb., Breakout Force 8,750 lb., Ground Pressure 5.7 psi., Standard Hydraulic Flow 21 gpm., Track Size 12.6 , Travel Speed (2) 5.8 (8.2) mph, Ground Clearance 9.3 , --- Dimensions ---Length 112.3 , Height 81.1 , Width 71.5 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 DEERE 325G Skid Steers INDUSTRIAL

2023 YANMAR VIO35-6A, Excavators - Mini (up to 12,000 lbs), Full Factory Warranty! 2023 Yanmar VIO35 Mini Excavator, **Yanmar Quick Attach,Open ROP, 2-Speed, Pattern Changer, Backfill Blade, Rubber Tracks, Work Lights, 3-Way Valve,--- Warranty Information ---Basic Warranty - 10APR27 or 4,000 Hours Whatever Comes First,--- Specs --- Engine Model 3TNV88-BQBVB,Net Power 24 hp, Hydraulic Pump Flow Capacity 16.7 gpm, Operating Weight 8,214 lb, Max Travel Speed 2.7 mph, Shoe Size 11.9", Length of Track on Ground 85 , Tail Swing Radius 30 , Max Dig Depth 11 3 , Max Loading Height 11' 7 , Max Reach Along Ground 17' 2 , Max Vertical Wall Digging Depth 9' 4 , --- Dimensions ---Length 189.6 , Width 69 , Height 97 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 YANMAR VIO35-6A Excavators INDUSTRIAL

2015 DOOSAN HP750WCU, Air Compressors, 2015 Doosan HP750 Towable Air Compressor, 750 CFM High Pressure, Pintle Hitch, --Specs, Free Air Delivery - 750 CFM High Pressure, Rated Operating Pressure - 100 psig Low Pressure, Rated Operating Pressure - 150 psig High Pressure, Pressure Range - 80-100 psig Low Pressure, Pressure Range - 80-175 psig High Pressure, Air Discharge Outlet Size - 2" NPT, Air Discharge Outlet - 1, Engine - QSB6.7, Emissions - Tier 4 Final, Horsepower - 135 hp, Number of Cylinders- 6,Length - 203.", Width - 90.2", Height - 88.5", Track WIdth - 80.3", Tire Size - 15", Shipping Weight - 8,620 lb, Easy Credit Application With Same-Day Approvals, Very Competitive Rates and Flexible Terms, Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available, World Wide Shipping, Full Service Shop, Full Parts Department Including Undercarriage, Tracks, Tires, and Much More! Nichols Equipment 5137 NW 2nd Street Des Moines, IA 50313 Nichols Equipment 920 Gateway Drive Ottumwa, IA 52501 Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2015 DOOSAN HP750WCU Air Compressors INDUSTRIAL

2023 GENIE TZ34/20, Lifts - Boom Lifts - Towable, 2023 GENIE TZ34/20 Towable Lift, 40' Working Height, 20' Working Outreach,500 lb. Working Capacity,Hydraulic Outriggers W/ Interlocks,Variable Speed System,Automatic Leveling Platform,AC Wiring to Platform,Surge Brakes,Parking Brake,--- Specs ---Lift Capacity 500 lb.,Turntable rotation 359 Degrees.,Machine Weight 3,150 lb.,Working Height 40 ,Working Outreach 20 ,Platform Height 34 ,Height (Stowed) 76.5 ,Length (Stowed) 16 8 ,Width 4 9.1 ,Ground Clearance 9.5 ,Platform Length 26.8 ,Platform Width 44 ,Entry Height (Extended) 6.4 ,Outreach (Working) 20 ,Outrigger footprint Length 10 9 ,Outrigger footprint Width 11 10 ,Easy Credit Application With Same-Day Approvals, Very Competitive Rates and Flexible Terms, Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available, World Wide Shipping, Full Service Shop, Full Parts Department Including Undercarriage, Tracks, Tires, and Much More! Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway Drive Ottumwa, IA 52501 Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 GENIE TZ34/20 Lifts INDUSTRIAL

2018 DEERE 350G LC, Excavators - Crawler, Deere 350G LC Excavator, Quick Coupler,13 1 Stick, Auxiliary Hydraulics, 32 Triple Grouser Tracks, Cab Heat/AC All Work Great, Pattern Changer,Reversing Fan, --- Build Sheet --- ENGINE TIER FT4, SHOES 700M 28" HD SINGLE BAR, SEAT-AIR SUSPENSION/HEATED, BOOM 1 PC W/ARM CYLNDERS(6.4, ARM 4.00M 13'1" W/BKT CYL, LESS BUCKET - 350DLC, ETHER STARTING AID, REVERSE FAN DRIVE, LIGHT PACKAGE, TWO-WAY MECH PATTERN CHANGER, CHROME EXHAUST, CUSTOMER DELIVERY PACKET, LESS GRADE READY MOUNTS, AFL OPTION 3.99M, JDLINK ULTIMATE 5YR 4G, --- Specs --- Engine John Deere PowerTech PSS 9.0 L, Cylinder 6, Power 271 hp, Fuel Tank Capacity 166 gal., DEF Tank 9.3 gal., Hydraulic Tank 51 gal., Undercarriage Length 16 2 , Swing Radius 11 10 , Min. Ground Clearance 20 , Tack Shoe 32 Triple Grouser, Arm Length 13 1 , Max. Digging Reach 38 11 , Max. Dumping Height 25 , Max. Digging Depth 26 10 , --- Dimensions --- Length 444 , Width 134 , Height 142 , Easy Credit Application With Same-Day Approvals, Very Competitive Rates and Flexible Terms, Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available, World Wide Shipping, Full Service Shop, Full Parts Department Including Undercarriage, Tracks, Tires, and Much More! Nichols Equipment 5137 NW 2nd Street Des Moines, IA 50313 Nichols Equipment 920 Gateway Drive Ottumwa, IA 52501 Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2018 DEERE 350G LC Excavators INDUSTRIAL

2017 GEHL RS8-42, Lifts - Telehandlers, 2017 Gehl RS8-42 Telehandler, 42' Lift Height, 8,000 Pound Capacity, Crab Steering,Frame Leveling,48" Wide Carriage w/ 48" Forks,Full Service at 2374.3hrs.,---Checklist---, Checklisted at 2374.3hrs.,Engine oil-good,Hyd hose condition-good,Lift cylinders-dry,Tilt cylinders-dry,Steer cylinders-dry,Antifreeze-0,Coolant leaks-no,Tires-75%,Tires-foam,Engine blow by-good,Operation of machine-good,Brakes work, Block heater-yes,Boom hoses-good,Boom chains-good,--- Specs --- Horsepower - 115 hp., Lift Capacity - 8,000 lbs., Max Lift Height - 42', Capacity at Max Lift Height - 7,000 lbs., Max Forward Reach - 28' 3", Capacity at Max Forward Reach - 1,000 lbs., Max Reach Below Grade - 14", Approximate Weight - 23,350 lbs., Ground Clearance - 16", Wheelbase - 10', Turning Radius - 13' 8", Frame Leveling - 10 Degrees, Fuel Capacity - 47 gal., Max Travel Speed - 18.8 mph., --- Dimensions ---Length - 229", Width 96 , Overall Height - 94", Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2017 GEHL RS8-42 Telehandler INDUSTRIAL

BLUE DIAMOND 104110, Stump Grinder, 24" Blue Diamond Stump Grinder,Standard Flow 16-20gpm,24" Wheel,Weight - 640 lbs.,Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Available For Sale Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on Facebook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

BLUE DIAMOND 104110 Stump Grinder Attachments ATTACHMENTS

2023 BOBCAT T450, Skid Steers - Track, **Full Warranty**2023 Bobcat T450 Track Loader,SJC Controls, Cab Heat and A/C, 2-Speed, Variable Flow Auxiliary Hydraulics, Bob-Tach, --- Warranty ---Default Warranty - 28APR25 or 2,000 Hours, What Ever Comes First,--- Specs ---Engine Manufacturer Bobcat, Horsepower 55 hp., Engine Tier 4, Fuel Capacity 17 gal., Fuel Type Diesel,Operating Capacity 1,490 lb., Operating Weight 6,424 lb., Tipping Load 4,257 lb., Standard Hydraulic Flow 16.7 gpm., Ground Pressure 4.82 psi., Travel Speed 7 mph, Ground Clearance 8.4 , --- Dimensions ---Length 98.4 , Width 55 ,Height 77.8 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 BOBCAT T450 Skid Steers INDUSTRIAL

2022 DEERE 333G, Skid Steers - Track, ***Bumper to Bumper Warranty!!***, 2022 Deere 333G Skid Steer, Backup Camera, Cab, Heat, A/C, 2-Speed, ISO Controls, Standard Flow Hydraulics, Mechanical Suspension Seat, Cold Start Package, ----Warranty----Basic Warranty - 29JUN2024 or 2,000 Hours - What Ever Comes First, Factory Undercarriage - 28JUN2025 or 4,000 Hours - What Ever Comes First, Emissions Warranty - 30JUN2027 or 3,000 Hours - What Ever Comes First,----Deere Build Sheet---- 2SP STDFL RC SLEV CB/AC PQT,ISO EH JOYSTOCK CONTROLS, ENGLISH OP MAN &amp; DECALS 06, JDLINK, WIDE ZIG-ZAG MULTI BAR TRKS, 2" SEAT BELT W/SHOULDERSTRAP, MECHANICAL SUSPENSION SEAT, COLD START PACKAGE 110 VOLT, ----Specs---- Engine Manufacturer Yanmar, Engine Model 4TNV94FHT, Horsepower 96.6HP, Engine Tier 4, Fuel Capacity 30 gal., Standard Hydraulic Flow 25 GPM, Operating Weight 12,100 lb., Operating Capacity 3,700 lb., Tipping Load 10,570 lb., Breakout Force 8,520 lb., Track Size 17.7 , Ground Pressure 5 psi., Travel Speed (2) 5.3 (7.8) mph, Ground Clearance 9.4 , ----Shipping Dimensions---- Shipping Length 122 , Shipping Width 80.7 , Shipping Height 87 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Available For Sale Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on Facebook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2022 DEERE 333G Skid Steers INDUSTRIAL

, Compactor Wheel, 24" 3 Wheel Compaction Wheel setup for Deere 135G65mm Pins,14 3/8" - Pin Center to Center, 10 1/4" - WideAlso fits Deere 135D 135G Hitachi ZX135..etc,Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

Other Other Compaction Equipment ATTACHMENTS

2023 DEERE 345G LC, Excavators - Crawler, ***Full Factory Warranty***, 2023 Hitachi Zaxis 345USLC-6 Excavator, 36" Bucket Included, 32" Triple Grouser Track Pads, 12'4" Stick, Auxiliary Hydraulics, Cab Heat/AC, 360 Degree Camera, Air Suspension Heated Seat, Radio, Factory Warranty - 26MAY2027 or 4,000 Hours - What Ever Comes First, --Specs, Engine - Isuzu 6HKI, Emissions - Tier 4 Final, Horsepower - 249 hp, Gradeability - 70%, Max Travel Speed Low - 1.6 mph, Max Travel Speed High - 2.5 mph, Drawbar Pull - 66,990 lb, Carrier Rollers - 2 Each Side, Track Rollers - 8 Each Side, Track Shoes - 48 Each Side, Ground Pressure - 7.3 psi, Swing Speed - 10.5 rpm, Swing Torque - 66,750 lb-ft, Operating Weight - 78,710 lb, Arm Digging Force - 28,550 lb, Bucket Digging Force - 45,410 lb, Max Reach - 37'7", Max Reach at Ground Level - 36'10", Max Digging Depth - 24'10", Max Cutting Height - 38'4", Max Dumping Height - 28'5", Minimum Swing Radius - 11'1", Max Vertical Wall - 22', Overall Length - 32'8", Overall Height - 11'3", Swing Radius - 6'10", Undercarriage Length - 16'2", Counterweight Clearance - 3'10", Cab Height - 10'7", Track Width - 32", Ground Clearance - 20", Overall Width - 11'1", Easy Credit Application With Same-Day Approvals, Very Competitive Rates and Flexible Terms, Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available, World Wide Shipping, Full Service Shop, Full Parts Department Including Undercarriage, Tracks, Tires, and Much More! Nichols Equipment 5137 NW 2nd Street Des Moines, IA 50313 Nichols Equipment 920 Gateway Drive Ottumwa, IA 52501 Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 DEERE 345G LC Excavators INDUSTRIAL

2023 DEERE 325G, Skid Steers - Track, *FULL FACTORY WARRANTY* 2023 Deere 325G Skid Steer, ISO Joystick Controls, 2 Speed, Hydraulic Quick Attach, Cold Start Package, Basic Warranty 27JAN2025 or 2,000 Hours - What Ever Comes First, Factory Undercarriage 26JAN2026 or 4,000 Hours - What Ever Comes First, Emissions Warranty 28JAN2028 or 3,000 Hours - What Ever Comes First, --- Deere Build Sheet --- 2SP STDFl SLEV CB/AC PQT, EH Joystick Controls, Engine Turbo 4TNV98CT, English OP Man and Decals, JDLink, Narrow Zig-Zag M Bar Track 65", 2" Seat Belt w/ Shoulder Strap, Mechanical Suspension Seat, Cold Start Package 110V, --- Specs --- Engine Manufacturer Yanmar, Engine Model 4TNV98CT, Engine Tier 4, Horsepower 70 hp, Fuel Capacity 21 gal., Operating Capacity 2,590 lb., Operating Weight 9,500 lb., Tipping Load 7,400 lb., Breakout Force 8,750 lb., Ground Pressure 5.7 psi., Standard Hydraulic Flow 21 gpm., Track Size 12.6 , Travel Speed (2) 5.8 (8.2) mph, Ground Clearance 9.3 , --- Dimensions ---Length 112.3 , Height 81.1 , Width 71.5 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 BOBCAT T650, Skid Steers - Track, **Full Factory Warranty**2023 Bobcat T650 Track Loader,Variable Flow Auxiliary Hydraulics,SJC,Enclosed Cab w/ Heat &amp; A/C, Quick Attach, 2 Speed,Adjustable Suspension Seat,Cold Start Package,12.6 Wide Tracks,--- Specs ---Power 74 hp,Fuel Type Diesel, Operating Capacity 2,570 lbs.,Travel Speed 6.6 mph,Ground Pressure 5.8 psi,Fuel Tank 27.4 gal.,Auxiliary Std Flow 23 gpm,--- Dimensions ---Length 108.4 ,Width 72.9 ,Height 81.3 ,Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2023 BOBCAT T650 Skid Steers INDUSTRIAL

2020 DEERE 324G, Skid Steers - Wheel, 2020 Deere 324G Skid Steer, ISO Joystick Controls, 2 Speed, Cab, Heat, A/C, Keyless Start, Quick Attach, Cold Start Package, AM/FM/ with Bluetooth Radio, --- Warranty Information ---Powertrain &amp; Hydraulic 20NOV25 or 2,000 Hours - What Ever Comes First, Emissions Warranty 22NOV25 or 3,000 Hours - What Ever Comes First,--- Deere Build Sheet --- NO PACKAGE,ISO SWITCHABLE CTLS &amp; JS PPK,TWO SPEED SKID STEER,ENGINE TURBO 4TNV98CT,ENGLISH OP MAN &amp; DECALS,12X16.5 10PR TITAN HD2000-II,STD HYD &amp; HYD SELF LEVELING,2" SEAT BELT W/SHOULDERSTRAP,POWER QUIK TATCH,CAB W/ HEAT, DEFROST &amp; AIR,STANDARD LIGHT PACKAGE,MECHANICAL SUSPENSION SEAT,STANDARD FAN DRIVE,COLD START PACKAGE 110V,RADIO AM/FM W/BLUETOOTH,KEYLESS START,78" CONSTR BKT W SERRATED ED,JDLINK 4G ULTMT W 5 YRS SERV,--- Specs --- Engine Manufacturer Yanmar, Engine Model 4TNV98CT, Engine Horsepower 74 HP, Engine Tier 4, Fuel Capacity 21 Gal, Operating Weight 7,700 lb., Operating Capacity 2,850 lb., Breakout Force 5,250 lb., Tipping Load 5,380 lb., Maximum Lift Height 126 , Maximum Dump Height 102.1 , Standard Hydraulic Flow 21 GPM, Travel Speed (2) 6.9(11.1) mph, Wheelbase 44.2 , Ground Clearance 9.3 , --- Dimensions ---Length 112.3 , Width 67 , Height 81.1 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2020 DEERE 324G Skid Steers INDUSTRIAL

2023 YANMAR VIO35-6A, Excavators - Mini (up to 12,000 lbs), Full Factory Warranty! 2023 Yanmar VIO35 Mini Excavator, **Yanmar Quick Attach - TAG Hydraulic Thumb**, Enclosed ROP, Cab Heat and AC2-Speed, Pattern Changer, Backfill Blade, Rubber Tracks, Work Lights, 3-Way Valve,--- Warranty Information ---Basic Warranty - 1JAN27 or 4,000 Hours Whatever Comes First,--- Specs --- Engine Model 3TNV88-BQBVB,Net Power 24 hp, Hydraulic Pump Flow Capacity 16.7 gpm, Operating Weight 8,214 lb, Max Travel Speed 2.7 mph, Shoe Size 11.9", Length of Track on Ground 85 , Tail Swing Radius 30 , Max Dig Depth 11 3 , Max Loading Height 11' 7 , Max Reach Along Ground 17' 2 , Max Vertical Wall Digging Depth 9' 4 , --- Dimensions ---Length 189.6 , Width 69 , Height 97 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

STANLEY MB50EXS, Hammer/Breaker - Hydraulic, Stanley MB05EXS Breaker, 80MM Pins, 15" Rib Spacing, 17.5 Pin Spacing, ---Specs, Impact Energy Class 5,000-6,78- ft/lbs, Oil Flow Range 32 - 45gpm, Maximum Hydraulic Pressure 2,700psi, Blows Per Minute 400 - 500, Weight (with tool bit) 3,964lbs, Length (with tool bit) 96", Tool Working Length 29", Tool Diameter 5.5", System Relief 3,100psi, Noise Level - 85 dBA @ distance 52-72ft, Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2011 STANLEY MB50EXS Hammers ATTACHMENTS

2012 BRADCO 12971, Jib, 2012 Bradco 12971 Telehandler Jib, Fits CAT &amp; JLG Telehandlers, Mounts Directly to the Telehandler (Forks Not Needed), Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2012 BRADCO 12971 Boom Attachments ATTACHMENTS

2018 STRICKLAND , Coupler / Quick Coupler, Strickland Hydraulic Coupler, Pin Size -- 110mm, Ear Spacing -- 18.5", Pin Spacing -- 24.75", Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2018 STRICKLAND Other Coupler ATTACHMENTS

2018 STRICKLAND , Coupler / Quick Coupler, Strickland Hydraulic Coupler, Pin Size -- 45mm, Ear Spacing -- 6.25", Pin Spacing -- 11.25", Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2018 VIRNIG TRN48, Trencher, 2018 48" Virnig Trencher, Specs,Dig Depth 48 , Side Shift Travel 8.5 /17 , Auger Diameter 17.3 ,Spoil Auger Discharge Reach 20 ,Optimal Trenching Angle 60°,Recommended Flow Rate 25 GPM., Operating Weight 1,220 lb., Shipping Length 84.9 , Shipping Width 58.5 , Shipping Height 25.8 , Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2018 VIRNIG TRN48 Trenchers ATTACHMENTS

ATLAS COPCO HM 1760 Q, Hammer/Breaker - Hydraulic, Atlas Copco Hydraulic Breaker, Pin Diameter -- 80mm, Pin Spacing -- 17.5", Rib Spacing -- 12.125", Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2007 ATLAS COPCO HM 1760 Q Hammers ATTACHMENTS

2019 DIGGA 2DSS, Auger, 2019 Digga Auger 2DSS, ***Fits on Machines with a Mini Skid Plate***, --Specs, Torque ft-lbs @ 3000 PSI - 2254, Recommended Flow - 10-26 GPM, Max Horse Power - 34 HP, Standard Output Shaft - 2" Hex, Max Drilling Diameter - 24" Weight - 123 lbs, Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

2019 DIGGA 2DSS Auger Attachments ATTACHMENTS

TRAXTER 33X12-20, Wheels, TRAXTER 33X12-20 (12X16.5) Solid Tires,Brand New Full Set! See pictures for hub size and all measurements!!!Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

TRAXTER 33X12-20 Wheels ATTACHMENTS

BRAWLER SOLID FLEX HPS, Wheels, Brawler Solid Flex HPS 33X12-20 (12X16.5) Tires,Brand New Full Set! See pictures for hub size and all measurements!!!Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

BRAWLER SOLID FLEX HPS Wheels ATTACHMENTS

DRB 450X86X58, Undercarriage, Rubber Track, DRB 450x86x58 Rubber Tracks,50% Tread,--- Specs ---Width 450 mm,Links 86 Total,Pitch 58 mm,Easy Credit Application With Same-Day Approvals, Very Competitive Rates and Flexible Terms, Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available, World Wide Shipping, Full Service Shop, Full Parts Department Including Undercarriage, Tracks, Tires, and Much More! Nichols Equipment 5137 NW 2nd Street Des Moines, IA 50313 Nichols Equipment 920 Gateway Drive Ottumwa, IA 52501 Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

DRB 450X86X58 Rubber Tracks ATTACHMENTS

DYNAMAXX LUG TRAC, Tires, Dynamaxx Lug Track Wheel Loader Tires, Complete Set of 4, 40-50% Tread Left, Taken off of a Deere 444K Wheel Loader, Tire Size: 17.5R25 Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

DYNAMAXX LUG TRAC Tires ATTACHMENTS

2023 BOBCAT T650, Skid Steers - Track, **Full Factory Warranty**2023 Bobcat T650,Enclosed Cab, Quick Attach, Foot Controls,2 Speed,--- Specs ---Power 74 hp,Fuel Type Diesel, Operating Capacity 2,570 lbs.,Travel Speed (2) 6.2 mph (8.7 mph),Ground Pressure 5.7 psi,Fuel Tank 43.9 gal.,Auxiliary Std Flow 23 gpm,--- Dimensions ---Length 136.8 ,Width 72.9 ,Height 81.3 ,Easy Credit Application With Same-Day Approvals,Very Competitive Rates and Flexible Terms,Wide Variety of Attachments Including- Buckets, Forks, Mowers, Augers, and More Available,World Wide Shipping,Full Service Shop,Full Parts Department Including Undercarriage, Tracks, Tires, and Much More!Nichols Equipment5137 NW 2nd StreetDes Moines, IA 50313Nichols Equipment920 Gateway DriveOttumwa, IA 52501Like us on FaceBook!! Express Financing Get Pre-Approved Get a FR8Star Shipping Estimate

Nichols Equipment - Des Moines

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

2011 STANLEY MB50EXS

2012 BRADCO 12971

2018 STRICKLAND Other

2018 STRICKLAND Other

2018 VIRNIG TRN48

2007 ATLAS COPCO HM 1760 Q

2019 DIGGA 2DSS

TRAXTER 33X12-20

BRAWLER SOLID FLEX HPS

DRB 450X86X58

DYNAMAXX LUG TRAC

2023 BOBCAT T650