location_lockdown

referral_links

gallery_videos

phone_override

Marcel Equipment Ltd

CAT C9.3 ACERT Engine, 21’4” Reach Boom, 12’10" Reach Stick, DB Linkage w/ Lifting Eye, Miller Powerlatch Quick Coupler, High &amp; Medium Pressure Aux Hyd, Auxiliary Control Joysticks, Smart Boom, 28” Triple Grouser Shoes, Heated &amp; Cooled Seat, Flood Light Arrangement, Rear View Camera, High Speed Engine &amp; Hyd Oil Change, Electric Onboard Refueling Pump, Heavy Duty Bottom Guards, Load Control Valves, Grade Control Arrangement, Loadrite X2350 Scale System, Groenveld Auto Greaser, 66" Digging Bucket - 3.0 CYD, Prolec Capacity &amp; Height Limiter System, Rated at 319 HP, Weight 84,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

2016 CATERPILLAR 336FL XE Excavators EQUIPMENT

ECM IDLE HOURS: 3125, LOAD FACTOR: 14%, CAT C13 ACERT Engine, Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Joystick Steering, Ride Control, Aggregate Arrangement, CAT Payload System, Autodig Function, Bridgestone VSNT L4 29.5R25 Tires, NEW L5 Tire Option Available, CAT 7.75 CYD GP Bucket, CAT 7.5 CYD Spade Nose Bucket Available, Rear View Camera, Front &amp; Rear Roading Fenders, Axle Oil Coolers, Joystick Bucket Control, Powered Heated Rearview Mirror, Remote Door Opener, Halogen Flood Light Arrangement, Rated at 425 HP, Weight 67,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT dealer prior to Marcel Equipment owning the machine; At 792 hours, installed NEW seat air compressor. At 891 hours, completed 500 hour service. At 1,976 hours, completed 2,000 hour service. At 2,494 hours, completed 500 hour service. At 2,903 hours, completed 3,000 hour service. At 3,378 hours, completed 500 hour service. At 3,985 hours, completed 2,000 hour service. At 4,412 hours, completed 500 hour service. At 4,861 hours, completed 5,000 hour service. At 5,429 hours, completed 500 hour service. The following was completed by Marcel Equipment: Upon arrival to yard, machine was completely stripped for power washing. Machine was inspected visually &amp; operationally. Engine oil filter was cut open - clean. Transmission filter was cut open - clean. Hydraulic filter was cut open - clean. Axle oils were checked - levels good &amp; oils clean. The following pressures were taken to ensure within OEM spec: Engine oil, Fuel, Engine boost, Stall &amp; double stall, Transmission main, Torque converter inlet &amp; outlet, Transmission lube, Transmission lock-up, Steering, Main hydraulic, Pilot, Brake cut-in &amp; cut-out, Brake accumulator, Ride control accumulator, Fan min &amp; max speeds. The following repairs were completed by Marcel Equipment: Line bored front &amp; rear steering cylinder mounting bores. Installed NEW pins &amp; bearings on steering cylinders. Cleaned &amp; inspected HVAC system &amp; installed NEW filters. Installed NEW hydraulic tank vent filter. Inspected cab &amp; all switch functions. REBUILT seat assembly. Repaired window washers &amp; installed NEW wipers. Completed miscellaneous minor repairs on machine. This unit is ready to go to work.

2019 CATERPILLAR 980M Loaders EQUIPMENT

CAT C13 ACERT Engine, Powershift Transmission, Cab (ROPS) with A/C, Joystick Steering, Ride Control, Aggregate Arrangement, CAT Payload System, Autodig Function, Bridgestone VSNT L4 29.5R25 Tires, NEW L5 Tire Option Available, CAT 7.75 CYD GP Bucket, CAT 7.5 CYD Spade Nose Bucket Available, Rear View Camera, Front &amp; Rear Fenders, Axle Oil Coolers, Joystick Bucket Control, Powered Heated Rearview Mirror, Remote Door Opener, High Speed Oil Change, CAT Autogreaser, Wheel Chocks, LED Premier Flood Light Arrangement, Maintained by CAT From New, Records &amp; Oil Samples Available, Rated at 425 HP, Weight 67,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 460 hours, completed 500 hour service. At 1,089 hours, completed 1,000 hour service. At 2,094 hours, completed 2,000 hour service. At 2,822 hours, completed 500 hour service. At 3,578 hours, completed 1,000 hour service. At 4,183 hours, installed NEW ARD head. At 4,253 hours, completed 500 hour service. At 5,088 hours, installed NEW DPF assembly. At 5,120 hours, completed 2,000 hour service. At 5,560 hours, completed 500 hour service. At 6,078 hours, installed NEW auto greaser pump. At 6,078 hours, installed NEW fuel transfer pump. At 6,117 hours, completed 1,000 hour service. At 6,120 hours, installed NEW fuel priming pump. At 7,464 hours, completed 2,000 hour service. At 8,175 hours, completed 500 hour service. At 8,284 hours, installed NEW steering control joystick.

ECM Idler Hours: 1,795, Load  Factor: 24%, CAT C13 ACERT Engine, Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Joystick Steering, Ride Control, Aggregate Arrangement, CAT Payload System, Autodig Function, 29.5R25 L3 Tires, NEW L5 Tire Option Available, CAT 7.75 CYD GP Bucket, CAT 7.5 CYD Spade Nose Bucket Available, Rear View Camera, Front &amp; Rear Roading Fenders, Axle Oil Coolers, 2 Lever Bucket Control, Powered Heated Rearview Mirror, Remote Door Opener, LED Flood Light Arrangement, High Speed Oil Change, Powertrain Guard, Crankcase Guard, CAT Autogreaser, Rated at 425 HP, Weight 67,000 LBS.  Repair/Condition Report: At 4,575 hours, CAT dealer installed NEW updated DEF manifold. At 4,804 hours, CAT dealer installed NEW fuel priming pump.

ECM Idle Hours: 3,022, Load Factor: 17%, CAT C7.1 Engine, Hydrostatic Transmission, Cab (ROPS) with A/C, Hydraulic 3 Valve - Aux Hyd, Front Axle Differential Lock, Front &amp; Rear Fenders, Rearview Camera, NEW Michelin XHA2 20.5R25 Tires, CAT Fusion Quick Coupler, CAT 4.2 CYD GP Bucket, CAT 7.2 CYD Bucket Available, CAT Forks Available, 62" Carriage, 54" Forks, Additional Counterweight Group, Flood Light Arrangement, Reversing Fan, Conventional Steering, Heated and Powered Side Mirrors, Rated at 188 HP, Weight 37,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

2018 CATERPILLAR 938M Loaders EQUIPMENT

Neutral Hours: 2,363, CAT C15 ACERT Engine, Engine Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, 28" Track Shoes,  CAT Semi U Blade w/ Tilt , Angle Blade With Tilt - 208" Wide - Available, Ripper is Available - Extra, Winch is Available - Extra, Rear Screen, High Speed Oil Change, Engine Air Pre-Cleaner, Reversing Fan, Top Carrier Rollers, Flood Light Arrangement, Rear View Camera, Rated at 364 HP, Weight 82,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 652 hours, performed 500 hour service. At 1,071 hours, performed 1,000 hour service. At 1,515 hours, performed 1,500 hour service. At 2,061 hours, performed 2,000 hour service. At 3,339 hours, performed 500 hour service. At 3,711 hours, installed NEW DPF temp sensor. At 3,711 hours, installed NEW ARD spark plug. At 3,831 hours, performed 1,000 hour service. At 4,412 hours, performed 2,000 hour service. At 4,974 hours, performed 500 hour service. At 5,525 hours, DPF was cleaned. At 5,744 hours, installed NEW front crankshaft seal. At 5,744 hours, cooling package was removed, cleaned &amp; pressure tested. At 6,015 hours, transmission was REBUILT. At 6,015 hours, torque converter was REBUILT. At 6,015 hours, installed NEW ARD head. At 6,026 hours, performed 2,000 hour service. At 6,051 hours, installed NEW a/c compressor &amp; belt. At 7,080 hours, installed NEW a/c compressor fan. At 7,080 hours, performed 1,000 hour service. At 7,692 hours, installed NEW main power relay.

2018 CATERPILLAR D8T Dozers EQUIPMENT

WARRANTY INCLUDED, Komatsu SAA6D125E-7 Engine, Dual Mode Engine Power, Powershift/Automatic Transmission, Lock-Up Torque Converter, Equipment Management Monitoring System, Cab (ROPS) with A/C, Steering Wheel, 26.5X25 Tires, 5.25 CYD Bucket, JRB Coupler, Optional Forks are Available - Extra, Ride Control, Rearview Camera, Automatic Reversing Fan, Boom &amp; Bucket Kick Outs, Loadrite L2150 Scale, Monolever Load Control, Front Fenders, Full Rear Fenders, Rated at 272 HP, Weight 51,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

2016 KOMATSU WA470-8 Loaders EQUIPMENT

CAT C13 ACERT Engine, 22’8” Reach Boom, 11’ Reach Stick, TB Linkage w/ Lifting Eye, Miller Powerlatch Pin Grabber, Miller Mate Coupler Safety Control, Full Tool Control, Auxiliary Hydraulics - 1 set, Auxiliary Control Joysticks, Smart Boom, Variable Gauge Undercarriage, 30” Triple Grouser Shoes, Full Length Track Guards, Heated &amp; Cooled Seat, Cold Weather Arrangement, Cab Flood Lights, Rear &amp; Right Side Cameras, High Speed Engine &amp; Hyd Oil Change, Electric Onboard Refueling Pump, Heavy Duty Bottom Guards, Bucket Cylinder Guard, Rated at 432 HP, Weight 115,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

2018 CATERPILLAR 352FL Excavators EQUIPMENT

CAT C13 ACERT Engine, 22’8” Reach Boom, 11’ Reach Stick, TB Linkage w/ Lifting Eye, Miller Powerlatch Pin Grabber, Miller Mate Coupler Safety Control, Full Tool Control, Auxiliary Hydraulics, 2 Sets &amp; Case Drain, Auxiliary Control Joysticks, Smart Boom, Variable Gauge Undercarriage, 30” Triple Grouser Shoes, Full Length Track Guards, Heated &amp; Cooled Seat, Cold Weather Arrangement, Cab Flood Lights, Rear &amp; Right Side Cameras, High Speed Engine &amp; Hyd Oil Change, Electric Onboard Refueling Pump, Heavy Duty Bottom Guards, Bucket Cylinder Guard, Rated at 432 HP, Weight 115,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

ECM Idle Hours: 1,463, CAT C13 ACERT Engine, 22’8” Reach Boom, 11’ Reach Stick, TB Linkage w/ Lifting Eye, Miller Powerlatch Pin Grabber, Miller Mate Coupler Safety Control, Single Set Auxiliary Hydraulics, Auxiliary Control Joysticks, Smart Boom, Variable Gauge Undercarriage, 30” Triple Grouser Shoes, Full Length Track Guards, Heated &amp; Cooled Seat, Cold Weather Arrangement, Cab Flood Lights, 360 Degree Cameras, High Speed Engine &amp; Hyd Oil Change, Electric Onboard Refueling Pump, Heavy Duty Bottom Guards, Rated at 432 HP, Weight 115,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

Neutral Hours: 2,345, CAT C9.3 ACERT Engine, Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, System One Undercarriage, 31" Extreme Service Track Shoes, VPAT Blade, CAT Slope Indicate, Drawbar , Ripper Available, Ripper Valve, Accugrade Ready, Premium Lighting Arrangement, Heated Seat, Fuel Tank Guards, Rated at 255 HP, Weight 55,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 3,591 hours, installed NEW a/c compressor, dryer &amp; expansion valve. At 3,990 hours, installed NEW pins &amp; bearings in equalizer bar. At 5,181 hours, installed NEW blade joystick &amp; calibrated. At 5,460 hours, performed required DPF maintenance. At 5,633 hours, installed NEW starter. At 6,474 hours, installed NEW NOX sensors. At 6,756 hours, resealed both track adjusters.

2016 CATERPILLAR D6T LGP VP Dozers EQUIPMENT

Neutral Hours: 2,663, CAT C9.3 ACERT Engine, Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, System One Undercarriage, 31" Extreme Service Track Shoes, VPAT Blade, CAT Slope Indicate, Automatic Reversing Fan, Drawbar Counterweight, Ripper Available, Ripper Valve, Accugrade Ready, Premium Lighting Arrangement, Heated Seat, Fuel Tank Guards, Rated at 255 HP, Weight 55,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 4,207 hours, installed NEW pins &amp; bearings in equalizer bar. At 5,141 hours, performed required DPF maintenance. At 6,171 hours, installed NEW a/c condenser. At 6,236 hours, performed top end adjustment. At 6,459 hours, installed NEW fuel solenoid, ARD head &amp; spark plug.

Komatsu SAAD140E-6 Engine, Autoshift/Powershift Transmission, Cab (ROPS) with A/C, Torque Converter Lockup, Auto Reverse Cooling Fan, 8 CYD Hensley Bucket, In Cab Bucket &amp; Boom Positioner, 29.5R25 Bridgestone VLT Tires, Steering Wheel Steer, 2 Lever Bucket Control, Load Rite L2150 Scale, Ride Control, Rear View Camera, Radio, Lights, Wipers, Heater, Inside &amp; Outside Mirrors, Rated at 353 HP, Weight 76,500 LBS. Repair/Condition Report: The following was completed by Marcel Equipment; Upon arrival to our yard, machine was completely stripped for power washing. Machine was inspected visually &amp; operationally. Engine, transmission &amp; hydraulic filters were cut open &amp; inspected for contaminates - all clean. The following pressures were taken to ensure within OEM spec: Engine oil, Engine boost, Transmission main, Torque converter in/out, Transmission lube, Steering, Main hydraulic, Brake cut-in/cut-out, Brake accumulator, Ride control accumulator, Stall speeds single &amp; double, Fan min &amp; max speeds. The following repairs were completed by Marcel Equipment: REMAN KDPF complete assembly installed. Completed bottom end bearings roll-in on engine. Resealed oil pan. Installed NEW rear main seal. Installed NEW main chassis wiring harness. Replaced hoses &amp; lines as required on machine. Verified all cab functions &amp; switches. Completed required repairs in cab.  Cleaned &amp; inspected HVAC system. Installed NEW bucket pins. Installed NEW bushings in bucket joints. This unit is ready to go to work.

2013 KOMATSU WA500-7 Loaders EQUIPMENT

CAT C13 ACERT Engine, 22’8” Reach Boom, 11’ Reach Stick, TB Linkage w/ Lifting Eye, Miller Powerlatch Pin Grabber, Miller Mate Coupler Safety Control, Full Tool Control, Auxiliary Hydraulics - 2 sets, Auxiliary Control Joysticks, Smart Boom, Variable Gauge Undercarriage, 30” Triple Grouser Shoes, Full Length Track Guards, Heated &amp; Cooled Seat, Cold Weather Arrangement, Cab Flood Lights, Rear &amp; Right Side Cameras, High Speed Engine &amp; Hyd Oil Change, Electric Onboard Refueling Pump, Heavy Duty Bottom Guards, Bucket Cylinder Guard, Rated at 432 HP, Weight 115,000 LBS. Repair/Condition Report: Please contact Mark or John for further information.

VOLVO D11H Engine, Fully Automatic Transmission, Exhaust Retarder, Hydraulic Variable Retarder, Secondary Steering, Cab with A/C, Recently replaced Goodyear 750/65R25 Tires, 100% Differential Lock on all Axles, Rear View Camera, Rear Window Guard, Heated Side Mirrors, Underhung Tailgate, Heated Box, Auto greaser, 31 Ton Capacity, Rated at 355 HP, Weight 52,000 LBS. Repair/Condition Report: The following repairs completed prior to Marcel Equipment owning the machine; At 6,506 hours, NEW engine was installed. All OEM servicing requirements completed from 5,700 hours. The following work was completed by Marcel Equipment at 8,640 hours: All belly pans &amp; panels were removed &amp; machine was power washed. Cab was detailed. All oil filters were changed, cut open &amp; inspected for contaminates - all clean. Engine was serviced including fuel filters. All oil levels were checked. Engine air filters checked - clean. Changed cab air filter. Complete visual &amp; operational inspections of machine &amp; all needed repairs completed. 2 leaking hoses were replaced - no further leaks. Complete safety check completed. All lights working. Radiator is clean, fans are all working correctly. Fan belts in good condition. Door hold cylinder replaced. The machine is ready to work.

2011 VOLVO A30F Articulated Trucks EQUIPMENT

ECM Idle Hours: 1,476, CAT C15 ACERT Engine, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, 28" Track Shoes, CAT Angle Blade with Twin Tilt - 180" Wide, CAT SU Blade is Available, Carco H140 Winch &amp; Fairleads, Rear Screen, CAT SS or MS Ripper is Available, High Speed Oil Change, Rear View Camera, Oil Samples Available, Fast Fill Fuel, Rated at 364 HP, Weight 82,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 675 hours, installed NEW ERG differential pressure sensors. At 675 hours, installed NEW blade control joystick. At 1,667 hours, installed NEW updated ARD air control valve. At 2,845 hours, installed NEW track groups on machine (28"). At 2,845 hours, installed NEW sprocket segments. At 2,845 hours, installed NEW idlers. At 2,845 hours, installed NEW track rollers. At 2,845 hours, resealed track frame cannons. At 2,845 hours, resealed blade lift cylinders &amp; installed NEW bearings. At 5,071 hours, installed NEW DPF filter. At 5,731 hours, installed NEW batteries.

2013 CATERPILLAR D8T Dozers EQUIPMENT

ECM Idle Hours: 1,301, CAT C15 ACERT Engine, Engine Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, 24" Extreme Service Track Shoes, HDXL Undercarriage, CAT Angle Blade with Twin Tilt - 180" Wide, CAT SU Blade is Available, MS Ripper, HID Flood Light Arrangement, Automatic Reversing Fan, Heated &amp; Cooled Seat, Rear View Camera, Rated at 364 HP, Weight 82,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 1,004 hours, installed NEW a/c evaporator core. At 2,097 hours, installed NEW fuel pressure regulator &amp; fuel transfer pump. At 3,720 hours, converted System One undercarriage to SALT. At 3,720 hours, installed NEW HDXL track groups, idlers &amp; segments.

2012 CATERPILLAR D8T Dozers EQUIPMENT

ECM Idle Hours: 2,075, CAT C15 ACERT Engine, Engine Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, Fuel Tank Guards, 24" Extreme Service Track Shoes, CAT Angle Blade with Twin Tilt - 180" Wide, CAT SU Blade is Available, Carco H140 Winch &amp; Fairleads, Rear Screen, CAT SS or MS Ripper is Available, High Speed Oil Change, Accugrade Ready, Flood Light Arrangement, Rear View Camera, Oil Samples Available, Rated at 364 HP, Weight 82,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 1,925 hours, installed NEW DPF filter. At 2,228 hours, installed NEW a/c evaporator. At 3,029 hours, installed NEW ARD head. At 3,214 hours, resealed implement pump. At 3,908 hours, installed NEW segments, idlers, rollers &amp; track chains. At 6,601 hours, installed NEW a/c condenser, dryer &amp; accumulator. At 6,685 hours, performed 1,000 hour service.

ECM Idle Hours: 1,020, CAT C9.3 ACERT Engine, Powershift Transmission, Cab (ROPS) with A/C, Differential Steer, HDXL Undercarriage, 28" Extreme Service Track Shoes, VPAT Blade, Automatic Reversing Fan, Drawbar Counterweight, Ripper Available, Grade Control Arrangement, Ripper Valve, Flood Light Arrangement, High Speed Oil Change, Rated at 255 HP, Weight 55,000 LBS. Repair/ Condition Report: The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine; At 3,012 hours, REBUILT the equalizer bar. At 3,328 hours, resealed all cylinders &amp; installed NEW pins &amp; bearings. At 3,691 hours, installed all NEW pins &amp; bearings in blade assembly &amp; line bored where required. At 4,312 hours, completed engine valve set. At 4,312 hours, installed all NEW fuel injectors. At 4,312 hours, installed NEW water pump. At 4,557 hours, installed NEW a/c compressor &amp; dryer. At 4,658 hours, resealed blade lift cylinders. At 4,659 hours, installed NEW batteries. At 4,659 hours, installed complete NEW HDXL undercarriage. At 4,824 hours, REBUILT torque converter. At 4,824 hours, installed REMAN transmission pump. At 4,824 hours, REBUILT transmission including the new modulating valves, planetary gears &amp; wiring harness. At 4,824 hours, REBUILT brake assemblies. At 4,824 hours, installed REMAN transmission cooler. At 4,824 hours, resealed brake control valve. The following was completed by Marcel Equipment: This machine was stripped &amp; power washed. Hired local CAT dealer to perform the following; CAT TA1 inspection (no oil samples). Service emissions system if needed. Perform performance checks - boost, fuel, hydraulic &amp; transmission pressures. Change &amp; cut open all filters to inspect for contaminates. Inspect magnetic plugs/screens &amp; suction screens. Service emissions system. Check oils &amp; levels. Update ECM flash files. Check for applicable service letters. The following repairs were completed by Marcel Equipment: Completed our own visual, operational &amp; mechanical inspections. Installed NEW parking brake switch. Replaced all wiper blades. Installed NEW idler guard wear strips. Resealed blade angle cylinder. Line bored angle cylinder mounting bores on blade. Installed NEW bearing on angle cylinder rod end. Line bored equalizer bar mounting bores on machine. Installed NEW pins &amp; bearings on equalizer bar. DPF &amp; DOC were sent out for cleaning. Replaced DPF temp sensor &amp; ARD head sensor. Installed NEW track cannon seals on both sides. Installed NEW piston on track adjuster and resealed. Resealed track adjusters. Serviced batteries, connections &amp; load tested. Serviced &amp; cleaned a/c &amp; heater system. Verified all cab functions &amp; switches. Checked all grease points and greased unit. Serviced batteries, connections &amp; tested.

2014 CATERPILLAR D6T XW VP Dozers EQUIPMENT

Volvo D11L Engine, Fully Automatic Transmission, Exhaust Retarder, Lock Up Torque Converter, Secondary Steering, Cab with A/C, 23.5R25 Radial Tires, 100% Differential Lock on all Axles, Heated Seat, Rearview Camera, Rear Window Guard, 27.5 Ton Capacity / 20 CY, Rated at 315 HP, Weight 50,000 LBS. Repair/Condition Report: Following are service/repairs completed by Marcel Equipment Limited: All guards &amp; covers were removed, unit was power washed. Completed visual &amp; operational inspections. Engine oil &amp; filter were changed, filter was cut open &amp; checked for contaminates - clean. Transmission filter was changed &amp; checked - clean. Hydraulic filter was changed &amp; checked - clean. All wheel planetary &amp; differential oil levels good &amp; oils clean - except front differential. Found slight brass flakes in front differential. It will be coming out to be inspected for source of metal. Load tested batteries - installed NEW ones. All pressures will be checked to ensure within OEM spec: fuel engine oil, transmission, torque in, lube, steering, hydraulic. Checked suspension system - good. Checked all gauges, lights &amp; controls. Checked a/c &amp; heater. Checked all grease lines &amp; greased machine. Checked articulation - good. Checked oscillation - good. Checked service brakes &amp; parking brake - good. Checked 6 wheel drive - good. Checked u-joints - good. Checked steering pins &amp; bearings - good. Drain plug on transfer case leaking - replaced oil &amp; resealed. Set front suspension cylinder heights. Replaced 2 hoses for box cylinders. Installed NEW radio. Installed NEW key pad in cab. Cleaned a/c evaporator core. Resealed oil filter housing. Installed NEW exhaust pipe. Installed NEW inclination sensor.

Marcel Equipment Ltd

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

2016 CATERPILLAR 336FL XE

2019 CATERPILLAR 980M

2019 CATERPILLAR 980M

2019 CATERPILLAR 980M

2018 CATERPILLAR 938M

2018 CATERPILLAR D8T

2016 KOMATSU WA470-8

2018 CATERPILLAR 352FL

2018 CATERPILLAR 352FL

2018 CATERPILLAR 352FL

2016 CATERPILLAR D6T LGP VP

2016 CATERPILLAR D6T LGP VP

2013 KOMATSU WA500-7

2018 CATERPILLAR 352FL

2011 VOLVO A30F

2013 CATERPILLAR D8T

2012 CATERPILLAR D8T

2012 CATERPILLAR D8T

2014 CATERPILLAR D6T XW VP

2017 VOLVO A25G