2011 SANDVIK, DP1500 Drills - Vertical, 2011 Year - Sandvik DP1500 PanteraCat C-11 Tier 3 Diesel Engine11,149 Engine Hours4,753 total percussion hoursDrifter was last done @ last rebuilt in March of 2021 at around 10,100 &amp; 4,229 percussion hoursEverything on the machine works well.Serial Number:

2011 SANDVIK DP1500 Drills / Drilling Equipment EARTHMOVING

Larmee Equipment & Supply

2005 SANDVIK, DC300 Drills - Vertical, Engine: Deutz-AG BF4L Tier-274 HP-Fuel- DieselWeight: 11,023 lbs.Self-Propelled 4-wheel. Oscillated Drive CarrierHL 300 Hydraulic Top HammerBoom DB300-ArticulatedHydraulic Jacks-4Dust Collector &amp; Water systemTotal Engine Hours: 2,872Recent Repairs:2,804 hrs. Throttle Cylinder, Fuel Filter2,776 hrs. Rebuild Drifter, Adjust Wear Plates2,680 hrs. 1,000 hr. Service-oil, fuel, air &amp; hydraulic fluids/filtersReplaced Battery2,580 hrs. Replace Fuel Filter, Drain and Clean Fuel TankGREAT SHAPE &amp; READY TO WORK!Serial Number:

2005 SANDVIK DC300 Drills / Drilling Equipment EARTHMOVING

2007 SANDVIK, DP1500 Drills - Vertical, CAT C11 diesel engineHL1560 DrifterShowing 2,189 engine hours but that is incorrectEngine was rebuilt approximately 1,500 hours ago7,916 percussion hoursSerial Number:

2007 SANDVIK DP1500 Directional Drill EARTHMOVING

2015 SANDVIK, DINO DC400RI Drills - Vertical, Tier 4, Volvo 4 Cylinder Diesel Engine, Requires Diesel Exhaust Fluid, 16 ft Boom, 22 ft Mast, Rod Changer, Dust Collector, 10 in Single Grouser Track Shoes, Radio Remote Control, 1,008 Engine HoursSerial Number:

2015 SANDVIK DINO DC400RI Drills / Drilling Equipment EARTHMOVING

Prestige Equipment, Inc.

2015 SANDVIK, DP1500I Drills - Vertical, 6,900 Engine Hours2,480 Percussion HoursSerial Number:

2015 SANDVIK DP1500I Drills / Drilling Equipment EARTHMOVING

2020 SANDVIK, DC130Ri Drills - Vertical, 350 Engine Hours150 Percussion HoursRD106 Hydraulic DrifterCAT C2.2T EngineExcellent ConditionSerial Number:

2020 SANDVIK DC130Ri Drills / Drilling Equipment EARTHMOVING

2012 SANDVIK, DX800 Drills - Vertical, 11,200 total frame hoursEngine was redone by Caterpillar, This was a New Engine from Cat @ 9,174 frame hoursSo just around 2,000 hours on the new cat engine. Drifter was just serviced about 300 percussion hours ago. Unit has been very well maintained. Fully functional. **Comes with some drill steel**Serial Number:

2012 SANDVIK DX800 Drills / Drilling Equipment EARTHMOVING

2014 SANDVIK, D25KS Drills - Vertical, Unit is set up for 4.5 Diameter Pipe x 3.5 API Thread*Comes with 2 x 30 ft pipe in pods &amp; 1 x 25 ft starter*Powered by a CAT C18 Diesel Engine: 469 kW*Equipped with a 32,8 m3/min/24,1 Bar onboard air compressor (1160 cfm / 350 psi) @1800 RPMAsking $750,000.00 But open to offersSerial Number:

2014 SANDVIK D25KS Drills / Drilling Equipment EARTHMOVING

2000 SANDVIK, DX700 Drills - Vertical, 3.5 4.5 Inch Class*CAT Diesel Engine*HL700 Drifter*Set up for T45120 TurntableEngine Hours - Approx. 10,300 Percussion Hours Approx. 4450 Drifter last serviced at 4368Serial Number:

2000 SANDVIK DX700 Drills / Drilling Equipment EARTHMOVING

1998 SANDVIK, DP900 Drills - Vertical, 3.5 4.5 Inch Class*HL1000 Drifter comes with both T51 &amp; GT60 Gear*CAT Engine, Runs Great*- CAT 3126 diesel engine with 8400hours. Good results on Engine oil analysis report at 8400 hours, performed Dec.3, 2015. CAT Engine produces good power with clean exhaust.- HL1000 Series Drifter / Hammer with 3206 percussion hours, approx.. 500 percussion hours on hammer since last reseal. Running heavy duty 60 mm diameter body shank, Sandvik part # sha 7306-6014-02/ T51 HL 1000/1010 D60L670.- Machine is currently set up for T51, Recently installed a new T51 shank in drifter.- Equipped with Qty. 5 - T51 x 14' foot MF Rods which are like new or with little wear. - Unit comes with the Parts to convert rod changer to GT 60 included if desired. - 4 new wire rope feed cables installed June/ 2015.- ROPS cab with AC and lights.- water injection system with tank comes with. - standard angle indicator.- Machine painted 3-1/2 years ago. - Newer undercarriage with track guards.- imported from California USA 3/-1/2 years ago, no rust.-Very clean well maintained owner operated unit. Complete parts and service manuals. - Drifter nitrogen charging kit and some spare parts.Serial Number:

1998 SANDVIK DP900 Drills / Drilling Equipment EARTHMOVING

2003 SANDVIK, D55SP Drills - Vertical, DTH Class*3508 Cat Engine*Single Pass Unit*Currently using a 8 DTH Hammer with a 9 BitEquipped w/ ( 2 ) 6 ½ x 25 ft. Drill Pipe w/ 8 DTH HammerDust CollectorMast 73 Long, U/C 85% - Excellent condition.Unit has the larger air package option: Dual Operation Air Compressor: With a push of the button can be a low pressure or high pressure unit. 1350 CFM @ 350 PSI @ 2100 RPM or 2000 CFM @ 100 PSISerial Number:

2003 SANDVIK D55SP Drills / Drilling Equipment EARTHMOVING

2009 SANDVIK, DP1500 Drills - Vertical, HL1560T Drifter, CAT C-11 Diesel EngineYEAR: 2009SANDVIK DP1500CAT C-11 Tier III Diesel Engine4815 Engine hours2018 Percussion / Drifter hoursSerial Number:

2009 SANDVIK DP1500 Drills / Drilling Equipment EARTHMOVING

REDUCED PRICE - 2020 Sandvik PlantInventory #: SND2180

Mobile Sandvik Plant Model: CE241 SN# QE241-10106 Year: 2020 Order# CJG10179 2530 Hours Caterpillar Motor 100KPA

NOTE: Motor Runs, Newer Belting, Steel Good, HAS HYDRAULIC Leaks, needs pumps and some tlc.

2020 SANDVIK CE241 Aggregate Sand, Gravel Plants EQUIPMENT

Aggregate Systems Inc

2012 SANDVIK DD321-40, Sandvik DD321-40 Jumbo Drill 2 Boom. Serial # 112D22742. 2012 Year of Manufacturer. TFX 6;/12‘Telescopic Feeds. Sandvik RD520 Drills. Boom (1) Hours 2513. Boom (2) Hours 2544. CE Label. Mercedes 904 Engine. Engine Hours 1650.

2012 SANDVIK DD321-40 Drills / Drilling Equipment EQUIPMENT

McDowell B Equipment

2004 SANDVIK COMMANDO 300, Sandvik Commando 300 Drill. Serial 104M6045-1. Year 2004. SMU 2638 Hours. 12 Drill Steel. Tethered Remote Controls. Atlas Copco 1238MER38 Drill. Deutz Engine Model BF4L2011@78 HP, Serial # 10399987. EPA Label on Engine. Hydraulic Centralizer. 3 Piston Hydraulic Driven High Pressure (3625psi) Legacy Water Pump. 12x16.5 Tires. Approximately Weight 5000 KG.

2004 SANDVIK COMMANDO 300 Drills / Drilling Equipment EQUIPMENT

SANDVIK EJC 30SX, Sandvik EJC 30SX 30 Ton Underground Truck. Kessler Axles with Fail Safe Brakes. DDEC 60 Series Engine. Clark Spicer 6422 Transmission . Box Liner in Excellent Condition. 23.5 X 25 Radial Tires. Certified OROPS Canopy. 354" Long, 102" Wide, 94" High. Nice Clean Truck. Eimco Jarvis Clark EJC SX 30 Spare Parts and Components Readily Available. Eimco Jarvis Clark EJC Ejector Boxes and Enclosed Cabs Available.

SANDVIK EJC 30SX Underground Trucks EQUIPMENT

2007 SANDVIK DD310-40C, 2007 YOM. Deutz BF4M2012C Engine. Sandvik HLX5 Drifter. Enclosed Cab. Gardner Denver Screw Compressor CT10H(2012). CR3-19 Water Pump. 460V 60 Hz. 16 Feed. 10 Steel. DIMS: 74 Wide. 114 High. 375 Long.

2007 SANDVIK DD310-40C Drills / Drilling Equipment EQUIPMENT

SANDVIK 30SX, Cummins Tier 3 Power. Kessler D91 Series Axles with Spring Applied. Hydraulic Release Brakes. Clark 6000 Series Powershift Transmission. 26.5R25 Tires. Heat, Air Conditioned ROPS, FOPS Cabin. Ejector Dump Box. Fire Suppression System.

SANDVIK 30SX Underground Trucks EQUIPMENT

SANDVIK TH430, Sandvik TH430 Underground Truck. Ejector Box with Tailgate. 30 Metric Ton Capacity. Volvo Engine. Kessler Axles D91 Series with Spring Applied Hyd Release Brakes. 26.5R25 Radial Tires. Extensive Refurbishing Done to This Truck. Work Ready. Additional Units Available.

SANDVIK TH430 Underground Trucks EQUIPMENT

PARTS MACHINE- SANDVIK EJC 30SX, 6589.5 Hours. Cummins QSL Engine. Transmission 6422-43. Kesslar Axles. Michelin 23.5R25 Tires. Auto Greaser. Fire Suppression System. 393" L x 112" W x 100" H. Coolant Good for -45.

SANDVIK , Sandvik Toro 151D/ LH203 Standard Bucket. 64".

SANDVIK Other Bucket ATTACHMENTS

SANDVIK , Sandvik LH306E Standard Bucket. 75".

SANDVIK , Atlas Copco Toro 500D Standard Bucket. 103".

SANDVIK , Sandvik Toro 400D Standard Bucket. 96".

SANDVIK , Sandvik TH430 Ejector Box. 112".

SANDVIK Other Beds ATTACHMENTS

SANDVIK , Sandvik Toro 1400 Enclosed Cab

SANDVIK Other Cabs ATTACHMENTS

SANDVIK , Sandvik Monomatic Canopy

SANDVIK , Sandvik EJC210 Standard Bucket. 104".

SANDVIK , Sandvik Toro 400D Standard Bucket. 93".

SANDVIK , Sandvik Toro 006 Standard Bucket. 81".

SANDVIK , Sandvik TH430 Standard Box. 105".

SANDVIK , Sandvik LH306/EJC130/JS350 Standard Bucket 77"

New & Used SANDVIK For Sale

Search Filter

Refine Search

Type

Distance

Listing Type

Category

Make

Model

Price

Condition

Hours

Year

Country

State

City

Class

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other

SANDVIK Other